How To - 220 Outlet in floor? - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: How To - 220 Outlet in floor? (/showthread.php?tid=7346542) Pages:
1
2
|
RE: How To - 220 Outlet in floor? - Roly - 02-21-2019 (02-21-2019, 10:51 AM)lift mechanic Wrote: Thanks for all the replies. Not if you want it to pass code. Would strongly suggest a disconnect at the machine if you do it like this. Roly RE: How To - 220 Outlet in floor? - lift mechanic - 02-23-2019 I decided to install a male L6 30 receptical is a box on the side of the 3 machines. Then make the existing cords into extension cords. Run the cords under the floor. The picture below is my first attempt at putting a picture in mt reply. Will it work? RE: How To - 220 Outlet in floor? - Stwood_ - 02-23-2019 (02-23-2019, 10:47 AM)lift mechanic Wrote: I decided to install a male L6 30 receptical is a box on the side of the 3 machines. Then make the existing cords into extension cords. Run the cords under the floor. The picture below is my first attempt at putting a picture in mt reply. Will it work? Will that box be mounted in the floor or on the machine? You said on the side of each machine, so............. RE: How To - 220 Outlet in floor? - lift mechanic - 02-23-2019 I will mount the box on the side of the tablesaw, jointer and planer. I will drill a hole just large enough in the floor to put the cord through and put several wraps of tape on the cord to act as a strain relief for the plug. The cost for each machine will be approx. $55 RE: How To - 220 Outlet in floor? - Stwood_ - 02-23-2019 Sounds like a plan |