+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: What's your jointer depth of cut? (/showthread.php?tid=7370372)
Pages:
1
2
RE: What's your jointer depth of cut? - shoottmx - 08-26-2022
(08-26-2022, 04:40 AM)R Clark Wrote: I've never actually measured the depth of cut; it's probably something like 1/32". I am more focused on a consistent cut, minimizing tearout as much as possible.
Same here except with a Byrd head I rarely need to mess with the cutters.
Gary
RE: What's your jointer depth of cut? - Philip1231 - 08-26-2022
.015, or roughly 1/64"
RE: What's your jointer depth of cut? - Tapper - 08-26-2022
Running a Byrd head on an 8" jointer set at 1/32". Has worked great for many, many years.
Doug
RE: What's your jointer depth of cut? - BC in CT - 08-26-2022
I generally keep it set at 1/32
RE: What's your jointer depth of cut? - KyleD - 08-27-2022
I normally keep my jointer shallow at about 1/32". But beingi its a parallel jointer design with a lever changing the depth is at most a 3 second and painless action.