Woodnet Forums
Saw making Part VII, the final part - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Saw making Part VII, the final part (/showthread.php?tid=7053360)



Saw making Part VII, the final part - KlausK. - 07-12-2015

The last steps up to the finished saw.



http://two-lawyers-toolworks.blogspot.de/2015/07/sagenbau-teil-vii-saw-making-part-vii.html

Klaus


Re: Saw making Part VII, the final part - Arlin Eastman - 07-12-2015

Someday I will be lucky enough to buy one of your saws.

I also would like to thank you, Pedder, and Alex for your parts in the blogs,

Arlin


Re: Saw making Part VII, the final part - KlausK. - 07-13-2015

We combined all saw making entries to one big one. For those who are interested:

http://two-lawyers-toolworks.blogspot.de/p/seit-unserem-beginn-in-2009-haben-sich.html

Cheers
Klaus


Re: Saw making Part VII, the final part - Heavansabove - 07-13-2015

KlausK. said:


We combined all saw making entries to one big one. For those who are interested:

http://two-lawyers-toolworks.blogspot.de/p/seit-unserem-beginn-in-2009-haben-sich.html

Cheers
Klaus


Gentlemen, thanks for a great tutorial and your great saws, over 100 pages of information and pictures. Much appreciated! I need to lift my game considerably.


Re: Saw making Part VII, the final part - Raven907 - 07-19-2015

Thanks for the very informative tutorial! Could you please describe your process for drying ebony?
Thanks,


Re: Saw making Part VII, the final part - KlausK. - 07-20-2015

Usually there is no drying process since we try to purchase dried Ebony only. Sometimes we happen to get it not that dry as we want. Then the endgrain parts get a coat of paraffin wax. If the shop humidity doesn't change too much, that will be enough. Pedder's shop is ok in this regard, mine isn't. From a well known toolmaker I got the hint to protect the long grain parts with shellac. Couln't try it however so far.

Klaus