+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Bandsaw vibration problem *DELETED* (/showthread.php?tid=7066301)
Bandsaw vibration problem *DELETED* - RickJ - 07-31-2015
Post deleted by RickJ
Re: Bandsaw vibration problem - JGrout - 07-31-2015
Quote:
14" SE bandsaw, using a 1" resaw blade
Willing to bet that is the issue right there
I expect you are flutter tensioning as well.
Re: Bandsaw vibration problem - RickJ - 07-31-2015
Acctually, just have now resolved it. Laguna called, more tension on drive belt, adjusted motor/drive belt pulley.
That 1"resaw blade... excellent
Re: Bandsaw vibration problem - TDKPE - 07-31-2015
RickJ said:Loosen the drive belt. Make it floppy loose, so it just turns the wheel (no blade). See if it still vibrates. Take the belt off. See if the motor vibrates. Check the tightness of both sheaves to their shafts.
checked balance, wheels & drive belt fine.
That's weird. Your solution wasn't there when my post went up.
And I would still check the sheave to shaft integrity.
Re: Bandsaw vibration problem *DELETED* - PaulC - 08-01-2015
Deleting the post when you have solved your own problem is anathema to the sense of sharing and community that makes places like this work.
It's also just weird.
Re: Bandsaw vibration problem - RickJ - 08-06-2015
Tom,
Yep, It was the V drive belt. thanks
Re: Bandsaw vibration problem *DELETED* - RickJ - 08-06-2015
yes it is weird... delete is nothing but decoraction.