Woodnet Forums
It may be odd but if it works... - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: It may be odd but if it works... (/showthread.php?tid=7333624)



It may be odd but if it works... - MarkSingleton - 09-29-2017

The bottom of the glass shower door in our master bath has a piece
of extruded aluminum affixed to it, to deflect water back into the shower.
The house is thirty years old and stuff is wearing out. So, for some things
I have "bought some time" with various fixes....

     The bottom hinge is worn the worst, and allows the door to sag a bit, 
just enough to rub against the tile. I have shimmed it with various bits of
plastic, etc and it will last a bit longer. Fingers crossed. In the middle of
a kitchen remodel and ground floor laminate installation, so don't need 
another problem/expense.

     Today though, the aluminum would NOT stop rubbing. At first I was 
going to use a file and trim off a bit. Deciding that would take a major 
amount of time, my eyes lit on a seldom used "Stanley Surform Plane."
Perfect. Worked a treat. Took longer to vacuum up the shavings off the
floor.

     Odd. But it worked.


RE: It may be odd but if it works... - woodhead - 09-29-2017

Pivot hinge??  Add a nylon washer as a spacer. Probably had one years ago.


Al