+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Saw blade type (/showthread.php?tid=7364068)
Saw blade type - trout2001 - 07-22-2021
Is there a type of jewelers saw blade that will cut hardwoods like teakwood, rose wood, bocote etc. Cutting 1 1/2×1 1/2×6 inch into 1 1/2×1 1/2 ×1/2 inch pieces.
RE: Saw blade type - iclark - 07-22-2021
(07-22-2021, 06:23 PM)trout2001 Wrote: Is there a type of jewelers saw blade that will cut hardwoods like teakwood, rose wood, bocote etc. Cutting 1 1/2×1 1/2×6 inch into 1 1/2×1 1/2 ×1/2 inch pieces.
If you are simply cutting 1/2" slices off of a 6" stick, why would you want to use a jeweler's saw?
A good pull-cut saw would probably give you better results with a kerf not much wider than a jeweler's saw.