+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Story Board to help with a derelict Tool Chest (/showthread.php?tid=7365179)
RE: Story Board to help with a derelict Tool Chest - Mike Brady - 10-26-2021
(10-23-2021, 10:50 AM)C. in Indy Wrote: It's a slow boat, but 4 drawers fully fitted now. I am pretty sure I'll work in some sort of accent beads on these at the end. It's fun to say all drawer fronts and backs came from one board
This is the larger chest that I mentioned; built about 10 years ago. I used all machined joinery, as my dovetails were not ready for prime time at my stage of skill-building. All of my small stuff goes in here and it is about double the size of a Gerstner and marginally larger than the North Bennett Street chest. Gerstner sell felt sheets so I an thinking of redoing the drawer liners.
![[Image: IMG-0122.jpg]](https://i.postimg.cc/cLCmZNhH/IMG-0122.jpg)
[size=medium]IMG [/size
[url=https://postimg.cc/3kMpCVP5][/url]
RE: Story Board to help with a derelict Tool Chest - Tapper - 10-26-2021
Nice looking work - love that QSWO!
Doug
RE: Story Board to help with a derelict Tool Chest - C. in Indy - 10-30-2021
More progress and a major resting point! (Trying to catch up with Mike...)
Every drawer needed tweaking, but it was worth it.
Here was the chest as purchased:
[attachment=38460]
Here I'm initiating some accent / bead lines:
[attachment=38461]
Now all 6 drawers are in place and moving nicely. New knobs are on order:
[attachment=38462]
Have a great weekend,
Chris
RE: Story Board to help with a derelict Tool Chest - Tapper - 10-30-2021
Are you going to going to put a radius on that bead line?
Doug
RE: Story Board to help with a derelict Tool Chest - C. in Indy - 10-31-2021
Regarding the line / bead... I'm not yet sure on that. The line's inset distance from the bottom-drawer-edge is on the bigger side, to try to match a dimple in the upper drawer-hanging central board. So this would be a large bead with a lot of material removed if I radiused it, so I've taken a pause there to think about it.
Meanwhile, the Gerstners, to manage movement of their lovely solid wood sides, always used a plywood back. This old back was delaminating, so I've set about applying some new oak veneer to it.
Using a machinist chest (60 pounds worth) to press 2 pieces of TV-stand-rescued MDF board:
[attachment=38480]
The beginnings of the rescued chest back:
[attachment=38481]
RE: Story Board to help with a derelict Tool Chest - C. in Indy - 11-03-2021
The plywood back with veneer and teeny-tiny edge rabbeting is a pain... But here goes the glue-in. It will need some touching-up later, but each step counts!
[attachment=38562]
RE: Story Board to help with a derelict Tool Chest - C. in Indy - 11-04-2021
That back veneer was real trouble, especially at the wavy-grain top edge. I decided to use a cutting gage and let-in a flaw-disguising strip:
[attachment=38573]
[attachment=38574]
Then, the knobs arrived!
[attachment=38575]
RE: Story Board to help with a derelict Tool Chest - Bill Holt - 11-05-2021
You have really done a nice job.
RE: Story Board to help with a derelict Tool Chest - C. in Indy - 11-06-2021
Thanks so much !!
Well, the rest is just adding oil and cutting felt...
Of course a power-stropping on the old Exacto-Knife was in order:
[attachment=38606]
Then, as you can see, there is a neighboring old small chest. All drawers are stuffed already!
Thanks for watching.
Chris
RE: Story Board to help with a derelict Tool Chest - Admiral - 11-06-2021
Very nice, a labor of love. Enjoy your chest!