05-02-2016, 08:10 PM
Installing kitchen cabs for bases above which will be installed shelving nearly 6' high and which will be heavily laden. Shelves will be screwed to studs but counter top still must support some of the weight as wells various printers, scanners, etc and random piles of paper. Is 3/4" enough or do I need to goto something thicker?
This is in response to George's wakeup call in the earlier thread. A single 3/4" thickness would mean just laying down some walnut ply. Thicker means either 1 1/4" or 1 1/2"
I know it's a newb question but I've never worked a case where 3/4" ply might no be enough.
TIA
This is in response to George's wakeup call in the earlier thread. A single 3/4" thickness would mean just laying down some walnut ply. Thicker means either 1 1/4" or 1 1/2"
I know it's a newb question but I've never worked a case where 3/4" ply might no be enough.
TIA
Thanks, Curt
-----------------
"Life can only be understood backwards; but it must be lived forwards."
-- Soren Kierkegaard
-----------------
"Life can only be understood backwards; but it must be lived forwards."
-- Soren Kierkegaard