09-08-2016, 04:22 AM
Question is: Where does the back of the blade contact the lower thrust bearing? On the left side or near the center of the bearing. Reason I ask is I just noticed that the blade on my saw just barely touches the left edge of the bearing face when I rotate the shaft the bearing is on. Rotating the shaft any further moves the bearing to the right resulting in no contact with the blade.
On the upper thrust bearing, the blade contacts the bearing in the center. Seems like that should hold true for the lower bearing. Thoughts.
On the upper thrust bearing, the blade contacts the bearing in the center. Seems like that should hold true for the lower bearing. Thoughts.