02-15-2024, 12:12 AM
I recently purchased a used Evenfall board. it is my understanding that the maker is not active currently. I and hoping that forum members can answer a few questions.
See attached images.
The fence has a corner cut off and I wonder if this is correct.
The fence appears to be reversible left to right and top to bottom. Should I flip it?
Would the missing corner cause possible blow out in its current orientation?
If the element is original, what is its purpose?
The edge of the top plate has a shelf that starts approximately 3 or 4 ply from the top.
The surface that the plane sole contacts.
The top 3 or 4 layers are cut back for the whole length.
Original purpose or has it been damaged?
Yep, I am left handed.
Any help would be greatly appreciated.
See attached images.
The fence has a corner cut off and I wonder if this is correct.
The fence appears to be reversible left to right and top to bottom. Should I flip it?
Would the missing corner cause possible blow out in its current orientation?
If the element is original, what is its purpose?
The edge of the top plate has a shelf that starts approximately 3 or 4 ply from the top.
The surface that the plane sole contacts.
The top 3 or 4 layers are cut back for the whole length.
Original purpose or has it been damaged?
Yep, I am left handed.
Any help would be greatly appreciated.