Escondido WW help?
#11
Anyone in the Escondido, CA area want to make some reasonable money to help finish a project?
It basically amounts to making 16 half lap joints in 2 X 4’s: 2 stiles about 45” long and 4 rails about 7’ long.
Must be square and tight.
Thanks,
Gary
Gary

Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Reply
#12
I am not in a position to be of any help, but I can suggest you try the San Diego Fine Woodworkers Association Craftsman List.

See if you can find a skills and reasonable location match on that list.
Reply
#13
(07-06-2018, 08:36 PM)Gary G™ Wrote: Anyone in the Escondido, CA area want to make some reasonable money to help finish a project?
It basically amounts to making 16 half lap joints in 2 X 4’s: 2 stiles about 45” long and 4 rails about 7’ long.
Must be square and tight.
Thanks,
Gary

You can do those from anywhere... bundle'm up and UPS'em out there
fred@kingstonco.com
Reply
#14
The material is already here though.
Gary

Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Reply
#15
(07-07-2018, 04:57 PM)Gary G™ Wrote: The material is already here though.

I thought you were in Florida.  You don't own a circular saw and a chisel?  I've also done what you want with a handsaw, though that would take longer.
Reply
#16
My SIL didn’t have tools; we went shopping.
I’ve done 23 half lap joints—9 to go.
Most were done with circular saw, chisel and rasps.
We borrowed a router and I’m banging but it’s still hot—yesterday was 108; it’s only 102 right now!

This is me:

http://lumberjocks.com/projects/385721
Gary

Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Reply
#17
Still looking for someone who can complete 4 easy sets of half lap joints in Escondido.
Anyone know someone who wants to make a couple hundred dollars for a few hours work?
Gary

Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Reply
#18
Small set of chisels, circular saw, and Amazon Prime?
-brew
Reply
#19
Don’t understand your reply?!?j
Gary

Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Reply
#20
If SIL doesn't have the tools, maybe send some his way so he can do the work...
-brew
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.