Posts: 14,769
Threads: 0
Joined: Sep 2004
Location: Butler, PA
Looks great John! Well done! That window trim detail is so much nicer than the standard j-channel.
If you are going down a river at 2 mph and your canoe loses a wheel, how much pancake mix would you need to shingle your roof?
Posts: 12,726
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(08-13-2018, 09:02 AM)stav Wrote: I don't know how big your actual shop is but with how well this building is turning out, I might consider moving there. Nice job.
Thanks. My shop is about 25 x 30 ft, about 3X larger than the shed. But right now the usable area is maybe half that because of all the wood I have stored in it. Once I get that wood moved to the shed, as well as my lumber kiln, I'll be able to move around a lot easier. While I have no permanent power in the shed, I will run an extension cord to it when I need to run the kiln. It only needs about 12 amps so that should work fine.
John