05-30-2019, 03:39 PM
We had a thread about this a long time ago.. I guess it expired.
Kreg has its own tracksaw which comes with a pretty cool table.
People were wondering about compatiblity with other track saws.
From this site:
"We have tested this table with Festool, Makita and Triton guide rails. The rails will mount to the brackets on the table using the T-slot on the bottom of the rail. Please note that you will need a minimum guide rail length of 62" for mounting on the long side of the table, or 32" for the short side of the table."
https://www.toolnut.com/kreg-acs1000-ada...e-kit.html
A picture of the table is on the link.. they sell just the top if you want to make your own base..
I don't own this, just thinking about buying it.
Kreg has its own tracksaw which comes with a pretty cool table.
People were wondering about compatiblity with other track saws.
From this site:
"We have tested this table with Festool, Makita and Triton guide rails. The rails will mount to the brackets on the table using the T-slot on the bottom of the rail. Please note that you will need a minimum guide rail length of 62" for mounting on the long side of the table, or 32" for the short side of the table."
https://www.toolnut.com/kreg-acs1000-ada...e-kit.html
A picture of the table is on the link.. they sell just the top if you want to make your own base..
I don't own this, just thinking about buying it.