Arlin has a large number of folks who have committed to help him run his venture. He has also expanded the scope to include LEO/fire personnel as well as military.

When he first sent me this list, I was concerned he was trying to think too big. In several conversations, I am confident he has help in place and is branching out in other areas to get folks to help.

If you have specific questions, please PM or email Arlin with those.

The following is a list of equipment he has/needs. This list will be updated at least weekly. The first number after the item is what he currently needs. The second number is what he now has.

POWER TOOLS

Radial Arm Saw 10" or 12" USED Delta or Craftsman 1 0
Radial Arm Saw Blades 10" or 12" 2 each 0
Scrollsaw 8 2
Scrollsaw Blades 1,2,3,4,5 Spiral 1,2,3,4,5 40 each 0
6" x 48" Belt and Disc Sander 1 0
Belts for 6"x48" 60,80,120,180,220 5 each 0
4" x 36" Belt and Disc Sander 1 0
Belts for 4"x36" 60,80,120,180,220 5 each 0

14" Bandsaw 1 0
Blades for Bandsaw 1/8, 3/16, 1/4, 3/8, 1/2 various TPI 4 of each 0

12" Bandsaw 2 0
Blades for Bandsaw 3/16, 1/4, 3/8 various TPI 4 each 0

5" ROS: Dewalt, PC, Bosch, Makita 6 1
Sanderpaper for ROS 80, 120, 180, 220 50 each 0
Sheet Paper 80, 120, 180, 220, 320, 400, 600, 800 40 each 0

Dust Extractor (WoodCraft #851091) 12 1
Dust Extractor Fittings for 4", 2 1/2", and 2 1/4" Gates, Elbows, Y's T's, Splices, and Clamps
Dust Air Cleaner 4 0
HVLP Spray Gun 2 0

Dead Blow Mallets 10 oz, 14 oz, 28 oz 4 each 0,1,0
Anti Fatique Floor Mats 8 0
Work Lights/Magnifying Work Lights 6,6 2,1
Heavy Duty Shelving System
Lumber Wizard 2 0
Heavy Duty Casters 4" 40 0
Pin/Pinless Moisture Meter 2 0

Table Vises Front and Side 10 each 0/1
Clamp Guides 50" and 96" 5 each 1,0
Snappy Counter sinks 5 piece 10 0
Tapered Plug Cutters 4 0
Counter sinks 10 0
Beall Wood Threaders 1/2" to 1 1/2" 1 0
Jig and Fixture Hardware Knobs, Handles and T-Bolts 1/4" 45 0
Toggle Clamps 35 0

Chisels

Palm Carving Chisels 9 sets 0
Beginners Carving Chisels 9 sets 2
Intermediate Carving Chisels 9 sets 1
Mortise Chisels 1/4" to 3/4" 9 each 0
Round Burnisher Carbide 3 0
Triangle Burnisher Carbide 3 0

Saws
Carcase Saw 10 1
Dovetail Saw 10 1
Blades for Fret Saw 12 0
Coping Saw 10 0
Blades for Coping Saw 12 0
Saw Files 2 Sets 0
Saw Vise 2 0
Miter Box 6 0

Rules and Measuring devises

12" Combo Squares 8th, 16, 32, 64 24 4
24" Rule 8th, 16, 32, 64 12 0
48" Rule 8th, 16, 32, 64 8 0
24" Straight Edge 2 0
48" Straight Edge 2 0

Tri Square 4" 12 2
Tri Square 6" 12 3
Tri Square 8" 12 0
Tri Square 12" 12 2

Marking Gauge/ Wheel Marking Gauge 16 1
Angle Gauge Electronic 3 0

Clamps
Clamps 12" 60 0
Clamps 18" 60 0
Clamps 24" 60 0
Clamps 36" 60 0
Clamps 48" 60 0
Clamps 60" 60 0
Pipe Clamp 1/2 30 4
Pipe Clamp 3/4 40 4

Safety
Safety Glasses 40 2
Hearing Protection in a Box of 100 6 2
Face Shield 28 0
Dust Mask boxes of 20 10 2
Foot Operated Dead Man Switch "On, Off" 10 0
Trend Air Shield Pro 4 0
Half Face Resperiator Fumes 6 0
MagSwitch 30mm 20 0
Miller dowel System Mini 4 1
Dowels for Mini Birch per 100 25 1
Dowels for Mini Cherry per 100 25 0
Dowels for Mini Black Walnut per 100 25 0
Miller dowel System 1x 4 1
Dowels for1x Birch per 40 30 1
Dowels for 1x Cherry per 40 30 0
Dowles for 1x Black Walnut per 40 30 0
Non Slip Pad 24x48 16 0
Router Speed Control 6 2
Router Bits Would like to have "Whiteside" bits of Different sizes 4 of each 0
Straight, Roundover, Cove, Flush, Rabbet, Core Box, Ogee, Chamfer, V-Grove 6 of each 1
Spiral Up and Down Carbide Bits 1/8, 3/16, 1/4, 3/8, 1/2 in 1/4 and 1/2 Shank 2 of each 0
Awls 12 2

Planes: Stanleys, Miller Falls, Sargents VBM, Record, Clifton

Stanley #48, #49, #95, #78, #148, #10, #10 1/4, #10 1/2, #289 4 each 0 48,49
Shoulder plane #75, #78, #79, #90, #92, #93 4 each 1 #78
Stanley or Equilivent Beading Tool #66, #69, Home Made 4 each 0
Stanley or Equilivent router planes # 71, #71 1/2, #72, #271 4 each 0
Stanley or Equilivent # Scrapers # 11 1/2, #12, #12 1/2, #80, #81, #85, #112, #212 4 each 2 #80,#12
Stanley or Equilivent Dado Plane #39-1/4, 39-3/8, 39-1/2, 39-5/8, 39-3/4, 39-13/16, 39-7/8, 39-1 5 each 1 each

Turning Tools and Equipment
Wood Lathe VS 12" Midi 1-8 TPI 8 3
Wood Lathe VS 16 - 20" 1 1/4"-8 TPI 3 0
Chucks 1 - 8 10 2
Chucks 1 1/4 - 8 8 0
Sorby or Equilivent Round Scraper 1" 8 0
Sorby or Equilivent Round Scraper 1 1/2" 8 0
Sorby or Equilivent Square Scraper 1" 8 0
Sorby or Equilivent Square Scraper 1 1/2" 8 0
Sorby or Equilivent Spindle 3/8" 8 2
Sorby Spindle 1/2" 8 2
Sorby Bowl 3/8" 8 2
Sorby or Equilivent Bowl 1/2" 8 2
Sorby or Equilivent Box & Bowl Scrapper 8 1
Sorby or Equilivent Box & Bowl Scrapper 8 1
Sorby Texturing Tool 3 0
Spindle Roughing Gouge 1" 8 0
Spindle Roughing Gouge 1 1/2" 8 0
Shallow Spindle Gouge 1 1/2" 8 0
Bowl Gouge 5/8" 8 0
Beading Tools 1/8, 1/4, 3/8, 1/2, 4 0
Parting Tool 1/16, 1/8, 3/16, Diamond, 4 each 1,0,0,0
Bedan 6 0
Chatter Tool 4 0
Wagner Texturing Tool 1/4 x 16 TPI, 3/8 x 12 TPI, 3/8 x 16 TPI 3 each 0
Capitve Ring Tool 1/4, 3/8 3 each 0
Face Plates Steel 3", 4", 6" for 1 x 8TPI 10 each 2,0,0
Face Plates Steel 3", 4", 6" for 1 1/4 x 8TPI 6 each 0
Revolving Center System for MT2 8 0

Double Ended Bowl Caliper 4 0
Forstner Bit Extenion 6" and 10" 3 each 0
1/2" Key Chuck 6 2
Slip Stones 4 0
Scraper Burnisher 3 0
Drill Chuck MT 2 4 1
Buffer 10" 3/4 hp to 1hp 2 0
Dial Calipers 8 1
12" Wing Compass 6 1
Inside and Outside 8" Calipers 6 1,