Woodnet Forums
A Watch Box (finished with pics) - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: A Watch Box (finished with pics) (/showthread.php?tid=6886892)

Pages: 1 2 3


Re: A Watch Box (finished with pics) - loosetoe - 11-23-2014

atgcpaul said:


[blockquote]loosetoe said:


I will post a few construction pics below to give you a feel for how it is made.

This is how the pierced diamonds are made. A square of holly gets a 1/16" cut in the center. That is filled with ebony. Little pieces are cut off of the ends. The trick is that the end MUST be face grain, not end grain. End grain will muddy with sanding and finish. SO...I used a 16" wide piece of Holly. Yes, you read that right. I cut 2" off of the end and made 8 sticks of this. I have a lot of these for the future.




Wayne, thanks for posting the pics. Do you use a 1/16" router bit for that groove?

Again, amazing work!

Paul


[/blockquote]


You certainly could. I used a slot cutter since that is what I had available. A skil saw blade would also work on the table saw.

These are 3/8" squares. If you go larger, make a bigger kerf.

I am certain I am not the first person to use this inlay, but i can honestly say that I imagined them and just instinctively knew how to make them. Once I saw them "come to life" I realized they were a classic shape.


Re: A Watch Box (finished with pics) - ephmynus - 11-23-2014

Wayne, absolutely amazing! Thanks for sharing and posting construction pics. Curious, how long were you working on the project and do you have any ideas regarding hours involved?


Re: A Watch Box (finished with pics) - loosetoe - 11-23-2014

ephmynus said:


Wayne, absolutely amazing! Thanks for sharing and posting construction pics. Curious, how long were you working on the project and do you have any ideas regarding hours involved?




I started the box in October. I don't recall how much time I spent. I recall doing all the inlays in one marathon 5 hour session. The last 3 weeks were spent spraying lacquer.

A lot of time was spent waiting on glue to dry.


Re: A Watch Box (finished with pics) - dav - 11-24-2014

Beautiful work!


Re: A Watch Box (finished with pics) - cputnam - 11-24-2014

Wow! You said you like details - I believe. That is some incredible work and the result is truly outstanding.


Re: A Watch Box (finished with pics) - Kansas City Fireslayer - 11-24-2014

I think you hit the "as close to perfect" nail right on the head. I can really appreciate how you took this box to the "next level" and then some. This is one of the most highly detailed projects I've seen on this forum in quite some time.


Re: A Watch Box (finished with pics) - Philip1231 - 11-24-2014

Outstanding!


Re: A Watch Box (finished with pics) - Gary G™ - 11-24-2014

Holy Smoke! Spectacular!


Re: A Watch Box (finished with pics) - Belle City Woodworking - 11-24-2014

Big Dave said:


I can't seem to find the right words, Wayne. Absolutely beautiful!





I too am at a loss for words! That is a spectacular piece!


Re: A Watch Box (finished with pics) - Gecko - 11-28-2014

Phenomenal work!