+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Case Miter Shooting Board (/showthread.php?tid=7123580)
Case Miter Shooting Board - BC in CT - 10-20-2015
I'm going to be building a series of boxes or cases from 1X hardwood,
about 4 inches in height with miter joints. I want to create the miters with a shooting board and LA block plane.
Does anyone know of a good plan/design for such a jig? The only thing
I can find are jigs for frame miters.
Thanks, Brian
Re: Case Miter Shooting Board - Jonathan S - 10-20-2015
What you want is a donkeys ear. You can make a dedicated one or add a attachment on to your standard shooting board. There are lots of different designs. If you will have a molded edge you will want both a left and right jig so you are always shooting into the moulding otherwide you will blow it out on the backside. Google will give you lots of ideas. Here is a good pdf from Pop Woodworking to get you started.
HTH
Jonathan
Re: Case Miter Shooting Board - Hank Knight - 10-20-2015
Here's a 45 degree shooting board (donkey's ear) I have on my "to do when I have time" list. I can't take credit for the design, but it's the nicest one of this type I've seen. If this belongs to anyone here, I'd appreciate any comments you care to offer about it.
Re: Case Miter Shooting Board - BC in CT - 10-20-2015
Thanks for the link Jonathan, the donkey ear looks like it may work well. I'll check my back issues for the article.
Re: Case Miter Shooting Board - BC in CT - 10-20-2015
The picture Hank provided also looks like a good design if anyone know where it originated from. I'm assuming these shooting boards can be used with any type of hand plane ?
Re: Case Miter Shooting Board - blackhat - 10-20-2015
Do you have a larger bench plane? I would not be trying to plane mitres on 8 edges with a block plane. I would saw or drawknife most of the waste from both edges of a longer blank, clean them up close with an angled fence on a bench plane and then crosscut the blank. Tweak the fit with your block plane freehand or use the jig.
Re: Case Miter Shooting Board - JoethePro - 10-20-2015
Here's an article that details the version that Hank posted. Our own Derek Cohen has posted quite a bit too. If you want some drama about them, check here.
Re: Case Miter Shooting Board - Derek Cohen - 10-21-2015
BC in CT said:
I'm going to be building a series of boxes or cases from 1X hardwood,
about 4 inches in height with miter joints. I want to create the miters with a shooting board and LA block plane.
Does anyone know of a good plan/design for such a jig? The only thing
I can find are jigs for frame miters.
Thanks, Brian
Brian, you want this article: http://www.inthewoodshop.com/Furniture/BuildingaMitredPencilBoxwithaShootingBoard.html
This ...
.. used with ..
.. creates ..
Regards from Perth
Derek
Re: Case Miter Shooting Board - renaissanceww - 10-21-2015
I made one of these for a Hand Tool School lesson a few year back. The design has been around a long time but I think one of the earliest examples I found was from Charles Hayward. Regardless, its very effective and for wide miters my go to solution even more than the donkey's ear I have as well.
Re: Case Miter Shooting Board - BC in CT - 10-23-2015
Thanks everyone, this certainly gives me a few good options.