Woodnet Forums
Suggest a new load disconnect switch - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Suggest a new load disconnect switch (/showthread.php?tid=7126273)



Suggest a new load disconnect switch - atgcpaul - 10-23-2015

This 40A switch needs to be replaced but I'm having trouble finding something comparable. It sits on a DIN rail. Any suggestions?



Thanks,
Paul


Re: Suggest a new load disconnect switch - GHR - 10-23-2015

I would suggest using google with the manufacturer and number that is visible on the top of the switch.

http://www.socomec.com/range-load-break-...mp;view=picture

http://www.directindustry.com/prod/socomec/product-8152-98832.html#product-item_1291983


Re: Suggest a new load disconnect switch - atgcpaul - 10-23-2015

GHR said:


I would suggest using google with the manufacturer and number that is visible on the top of the switch.

http://www.socomec.com/range-load-break-...mp;view=picture

http://www.directindustry.com/prod/socomec/product-8152-98832.html#product-item_1291983




Should have been more clear. Looking for something more readily available--like Monday. I need to go through their US distributor--they have one office in the US and noone picked up this afternoon. Trying to find an alternative. Grainger sells a Square D but it's only 3 pole.


Re: Suggest a new load disconnect switch - EricU - 10-24-2015

I usually go to Automation Direct for stuff like that. I think I have this disconnect on my mill disconnect


Re: Suggest a new load disconnect switch - atgcpaul - 10-29-2015

GHR said:


I would suggest using google with the manufacturer and number that is visible on the top of the switch.

http://www.socomec.com/range-load-break-...mp;view=picture





EricU said:


I usually go to Automation Direct for stuff like that. I think I have this disconnect on my mill disconnect




You were both right. I contacted the US sales office and after some back and forth, they said the easiest place to buy it was Automation Direct. After I slapped myself on the forehead for not searching for "Socomec" on Automation Direct, I ordered it and replaced the disconnect today. All better now.

Thanks to both.

Paul