Leigh rtj 400 users review - Printable Version +- Woodnet Forums (https://forums.woodnet.net) +-- Thread: Leigh rtj 400 users review (/showthread.php?tid=7210726) |
Leigh rtj 400 users review - mbw - 02-03-2016 Anyone have this jig opinion please Re: Leigh rtj 400 users review - Tony Z - 02-04-2016 Wife bought me one for a present-i have never usd it though! Where n PA are you located, in case you're near enough to take a look. Re: Leigh rtj 400 users review - mbw - 02-04-2016 Chester Springs Re: Leigh rtj 400 users review - Rich's Woodcraft - 02-04-2016 I bought this a while back to build a bedroom set with lots of drawers. As with these jigs the setup takes some time, but once done it was like corn through a goose. I have used a jig that mounted the piece in the jig and was never satisfied with that one. Being table mounted this is so much more safe and I absolutely love it. Very easy to manage dust collection and get consistent results. I also used it for a bit more complex setup with lipped half dovetails and worked perfectly. I highly recommend this: Re: Leigh rtj 400 users review - mbw - 02-04-2016 Thanks Rich Re: Leigh rtj 400 users review - Tony Z - 02-04-2016 mbw said: Well, that's about 170 miles away! If you're in DuBois, you're welcome to drop by. The unit appears well made and straight forward to use. But, as I said, I've never used it-cut my dovetails by hand and have for going on 15 years. Re: Leigh rtj 400 users review - Rich's Woodcraft - 02-04-2016 Looked and found a bit more that I wrote on this: Blog |