+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Walnut box for work (/showthread.php?tid=7290309)
Walnut box for work - Rob Young - 05-27-2016
At work we have a myriad of electronic test equipment. And occasionally, we manage to destroy something and have to replace it. This was recently the case with one of our DMMs. So we bought a new Fluke 87-5. Comes with a bunch of extra bits and things also have a tendency to scatter to the four corners of the earth on my bench, I told my boss I'd make a box in which to keep everything.
I think he thought I'd make it from plywood or something. He seemed a bit surprised it was walnut with a lid made using red-gum veneer...
Oh well, at least this way we can lose everything at the same time. Now, where did all the little clips for the logic analyzer go?
This was also the first box for which I used my new (inexpensive) HVLP (not HPLV like I had originally!) to spray shellac. Worked great! Had a small learning curve as far as setting flow rate and had to fix a little bit of orange peel that happened on the red-gum. But otherwise, well worth the (small) money.
The panel for the lid and the panel for the bottom are both MDF that I veneered. The bottom panel has walnut veneer. I like making quick boxes this way because I can glue in the panel and get a little bit of support for the mitered corners. Corner splines are cherry. Pretty much all the wood and wood like products (MDF) came from the scrap bin.
Edited to fix typo
Re: Walnut box for work - AHill - 05-27-2016
Nice box! When I was in the Army, Fluke was the best. It's what I have at home. I think you meant HVLP and not HPLV, but we get what you meant.
Re: Walnut box for work - Rob Young - 05-27-2016
AHill said:
Nice box! When I was in the Army, Fluke was the best. It's what I have at home. I think you meant HVLP and not HPLV, but we get what you meant.
Doh!
Yes, High Volume, Low Pressure. I will correct typo.
Some Fluke instruments ain't what they used to be. Other instruments are longer what they used to be but instead be Fluke... It gets very confusing.
Re: Walnut box for work - Wild Turkey - 05-27-2016
Rob Young said:
Am I the only one to see an alien lady in the inside of the top?
Re: Walnut box for work - Steve N - 05-27-2016
Nice box Rob. Love that Rorschach test veneered top
It gives you a different plate inside, and out. Love the little Alien on the inside
Re: Walnut box for work - Steve N - 05-27-2016
WT, cough up how you knew it was an Alien Lady
Re: Walnut box for work - Gary G™ - 05-27-2016
Nice work.
Re: Walnut box for work - Daniel S - 05-27-2016
That's a beautiful box. I hope it helps you hang onto the alligator clips, they seem to like running away!
Re: Walnut box for work - Phil S. - 05-27-2016
Nice job, Rob! The red gum really adds some pizzazz!
Re: Walnut box for work - Joel H. - 05-27-2016
Whoa! That is way too nice for a "work" box.
George, I'm thinking he recognized the two antenna coming out of her head each supporting another smaller head. Not exactly the girl next door look - ya know what I mean?
Joel