+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: ravioli rolling pin (/showthread.php?tid=7291036)
ravioli rolling pin - John Mihich - 05-28-2016
This is the pin that I made for the daughter. Not quite perfect - the ravioli are not 100% square - more of a rectangle.
Re: ravioli rolling pin - chips ahoy - 05-28-2016
very nice John. You will have a very happy daughter.
Mel
Re: ravioli rolling pin - goaliedad - 05-28-2016
You fix cars AND do nice woodworking. You are a very nice father.
Re: ravioli rolling pin - barryvabeach - 05-28-2016
John, thanks for the photo. You turned it on a lathe, then cut dados for the strips?
Re: ravioli rolling pin - GNP - 05-29-2016
Nice!!
Re: ravioli rolling pin - John Mihich - 05-29-2016
Yes. I made a scraper the size of the coves. I left the ends square and built a jig to cut the dadoes I in the blank. I installed the walnut pieces the remounted on the lathe and smooth the whole pin. I sanded up to 600 grit. Really fun project. I will be making 3 more.
Re: ravioli rolling pin - SCMedLion - 06-01-2016
Then you'll be all set up to take some great process pics for us next time, right?
I think I got it from your description, but seriously, pics always help.
Re: ravioli rolling pin - John Mihich - 06-02-2016
I will be doing another one this next week. This time I will take more pics. I was afraid it wasn't going to turn out; I don't do a lot of turning.
Re: ravioli rolling pin - Birdseye Bill - 06-02-2016
You done good. I am interested in the steps you took to make it.