+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: How do you spread glue over a large surface? (/showthread.php?tid=7293447)
Pages:
1
2
How do you spread glue over a large surface? - Shovel Man - 06-02-2016
The glueup is a bent lamination of 4 plys 30" x 72". The bend is pretty gentle, only 120" radius, but I need good strength in the final piece. Planning on using ordinary yellow glue, which will be plenty strong. Thinking of using a squeegee. What would you use?
Re: How do you spread glue over a large surface? - Earl Kelly - 06-02-2016
9" black foam roller Allow extra glue to start until the roller gets saturated.
Re: How do you spread glue over a large surface? - Gary™ - 06-02-2016
Under a buck. I use them for spreading glue when veneering to help get a uniform coating. Ace Hardware
Re: How do you spread glue over a large surface? - Wild Turkey - 06-02-2016
+1 on notched trowel. Roller works, but I find the trowel gives better control.
Re: How do you spread glue over a large surface? - Rick L - 06-02-2016
Small short nap paint roller. Squeegee too uneven
Re: How do you spread glue over a large surface? - ruffcutt - 06-02-2016
These
http://www.dickblick.com/products/speedb...CFYkIvAodP_EKiQ
Re: How do you spread glue over a large surface? - Herb G - 06-02-2016
Go with the trowel. You'll thank us later.
Re: How do you spread glue over a large surface? - John Mihich - 06-02-2016
+1 on foam roller. That's what I have used for larger pieces. Not perfect but pretty quick.
Re: How do you spread glue over a large surface? - Rodneywt1180b - 06-02-2016
How do I spread glue on a large surface?
I start by trying to spread glue on a small surface. The rest just happens.
Rodney
Re: How do you spread glue over a large surface? - AgGEM - 06-02-2016
J roller works too. Washable.
Ag