Woodnet Forums
Phase converter help - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Phase converter help (/showthread.php?tid=7313412)



Phase converter help - WaterlooMarc - 07-06-2016

I'm thinking about getting a phase converter so I can capitalize on all these old 3 phase machines selling for much cheaper than 1 phase. But I know absolutely nothing about them other than they're more expensive than I thought!

If I wanted to power a 5hp saw I'd need a 7.5hp phase converter, correct? Converter just plugs into regular 220v outlet and machine plugs into converter?


Re: Phase converter help - Dave Diaman - 07-06-2016

Buy yourself a VFD. Much cheaper and it will give you variable speed.


Re: Phase converter help - gcrimmins - 07-06-2016

Dave Diaman said:


Buy yourself a VFD. Much cheaper and it will give you variable speed.




A VFD is a good choice, but you would need one for each machine, and they get quite expensive for motors larger than 3hp. If you want to power multiple three-phase machines, then a rotary phase converter is the best choice. You might browse the archive over at owwm.org for more information.


Re: Phase converter help - daddo - 07-06-2016

WaterlooMarc said:


I'm thinking about getting a phase converter so I can capitalize on all these old 3 phase machines selling for much cheaper than 1 phase. But I know absolutely nothing about them other than they're more expensive than I thought!

If I wanted to power a 5hp saw I'd need a 7.5hp phase converter, correct? Converter just plugs into regular 220v outlet and machine plugs into converter?





I have a simple phase converter on my metal lathe for a 3hp 230v 3 phase motor. I wired it with two start caps and a potential relay as in the pic. There will be a loss of about 20% to 30% power this way- it hasn't affected my machine much at all @ 7.2 amps.





For full power (what you are probably talking about) you want to use a motor to phase it and yes, a 7.5 would be ideal for your 5 hp motor.

Like this; http://www.temcoindustrialpower.com/products/Rotary_Phase_Converters/PC0005.html

http://www.phaseconverter.com/wiring_diagrams.html


Re: Phase converter help - Rick F - 07-06-2016

WaterlooMarc said:


I'm thinking about getting a phase converter so I can capitalize on all these old 3 phase machines selling for much cheaper than 1 phase. But I know absolutely nothing about them other than they're more expensive than I thought!

If I wanted to power a 5hp saw I'd need a 7.5hp phase converter, correct? Converter just plugs into regular 220v outlet and machine plugs into converter?





A VFD makes sense for 3hp and less, but gets expensive at 5hp and up ..

There are 4 ways .. Static, VFD, Rotary, Digital .. The latter 2 will work with a 3 phase distribution panel and can be used to power multiple machines.


Re: Phase converter help - Jeremy s - 07-06-2016

The easiest for me was to just call American Rotary and order a 20 hp rpc. It powers a widebelt and a big shaper and i can add more at any time. I cant really remember but i think mine cost around $1500...not really sure but i do know the price is long forgotten but the quality is remembered every day i walk over and turn it on.


Re: Phase converter help - Rick F - 07-06-2016

[blockquote]Jeremy s said:




That last comment says it all .. do it once .. do it right .


Re: Phase converter help - MKepke - 07-07-2016

Rick F said:


[blockquote]Jeremy s said:




That last comment says it all .. do it once .. do it right .



$1500 is a lotta $200 3HP Teco FM50 VFDs.

-Mark


Re: Phase converter help - fixtureman - 07-07-2016

MKepke said:


[blockquote]Rick F said:


[blockquote]Jeremy s said:




That last comment says it all .. do it once .. do it right .



$1500 is a lotta $200 3HP Teco FM50 VFDs.

-Mark


[/blockquote]

What if he wants to run a 5 hp tool


Re: Phase converter help - Jeremy s - 07-07-2016

MKepke said:


[blockquote]Rick F said:


[blockquote]Jeremy s said:




That last comment says it all .. do it once .. do it right .



$1500 is a lotta $200 3HP Teco FM50 VFDs.

-Mark


[/blockquote]

So you can power widebelt sanders and 8 hp shapers with vfds?