+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Phylly Planes custom set of 4 dado planes (/showthread.php?tid=7336137)
Phylly Planes custom set of 4 dado planes - merrick - 01-05-2018
For sale is a set of 4 custom made Phylly Planes dado planes (by Phil Edwards of England). Serial # 109,110,111, and 112. I got them a few years ago but did not really got into using them much and sort of forgot about them after a cross-country move. Typically runs about 150 pounds/ea ($200/ea). You can learn more about them here
Asking $495 for a set of 4 (3/8, 1/2, 17mm, and 20mm). Shipping and insurance extra. Paypal.
Dado plane pictures
RE: Phylly Planes custom set of 4 dado planes - merrick - 01-10-2018
3/8 and 1/2 planes were sold. Price reduced on the 5/8 (17mm) and 3/4 (20mm) $125/ea shipped CONUS.
RE: Phylly Planes custom set of 4 dado planes - Jim Waldron - 01-11-2018
(01-10-2018, 09:50 PM)merrick Wrote: [snip] the 5/8 (17mm) and 3/4 (20mm) [snip]
Can we be a bit more accurate about the measurement of these planes? 20 mm is a full mm over 3/4inch and most 4/4 off the shelf surfaced lumber. It's about 2 mm over the size of "3/4 inch" plywood which is mostly "close" to 18 mm. The 17 mm is well over 5/8" and too small for 18 mm plywood. It would make for a happier post if your numbers were (a) checked, (b) consistent and © reliable. If your metric numbers are accurate, these planes are of limited utility in the U.S.
RE: Phylly Planes custom set of 4 dado planes - merrick - 01-12-2018
The actual measurements are in metric (17mm and 20mm). As everything in the hand tool world, mm or in is a relative thing as one often works to pair up a dado with its mating part.