Woodnet Forums
Carbide Tipped Blade Sharpening - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Carbide Tipped Blade Sharpening (/showthread.php?tid=7363024)



Carbide Tipped Blade Sharpening - lincmercguy - 05-25-2021

So I should have bought some sacrificial blades for my laminite flooring project instead. Now I have a couple of dull blades. Is there a good place to get them sharpened that has a quick turnaround?


RE: Carbide Tipped Blade Sharpening - Matt Swiderski - 05-27-2021

I’m not sure how fast they are, but https://ridgecarbidetool.com/pages/sharpening-service is a good place. And as a bonus I love their saw blades.


RE: Carbide Tipped Blade Sharpening - Aram - 05-28-2021

(05-27-2021, 09:28 PM)Matt Swiderski Wrote: I’m not sure how fast they are, but https://ridgecarbidetool.com/pages/sharpening-service is a good place. And as a bonus I love their saw blades.

Scott's Great guy, never a bad result


RE: Carbide Tipped Blade Sharpening - fredhargis - 05-29-2021

There are a number of good send-'em-in places, but you mentioned quick turnaround. Sending them out for sharpening and then waiting to get them back is almost certainly going to be a 2 week +/- process.....I think you want something local. Truthfully, around me even local is usually a week.


RE: Carbide Tipped Blade Sharpening - R Clark - 05-29-2021

My local shop takes at least a week.  I keep at least four multi-purpose blades on hand for this exact reason.


RE: Carbide Tipped Blade Sharpening - Timberwolf - 05-29-2021

(05-25-2021, 06:45 PM)lincmercguy Wrote: So I should have bought some sacrificial blades for my laminite flooring project instead. Now I have a couple of dull blades. Is there a good place to get them sharpened that has a quick turnaround?

..................
I touch them up with a diamond hone...just the face of each tooth...