Thank you Arlin and Steve this vase was made from 4 pieces glued together 2 of the seams are hidden in the Vee groves the other is there you have to look very close to see it though. Steve you are correct sir; Wiki says : The commercially important wood is reminiscent of mahogany, a member of the same family, with a distinctive figure, typically applied where figure is important. It has a density of 640 kg/m3. Demand for sapele, often marketed as "African mahogany," has increased sharply as a mahogany substitute in recent years due to genuine mahogany (Swietenia macrophylla) becoming a CITES Appendix II listed species.
(09-13-2017, 02:14 AM)MidwestMan Wrote: That looks great ! Did you hollow it out, all the way to the base?
I have a hard time hollowing out a 5 inch deep bowl. I have plenty to learn.
Midwest Man yes it's hollow all the way to the bottom, all though this being my first vase it's not as thin as I would have liked it to be about 5/16" to 3/8". When making these sort of turnings you can do them in sections, rings glued together hollowing as you go. Or you can use a hollowing tool and do the whole thing at once but this takes practice. Don't be afraid to try different ways of making things, I always use the KISS method (Keep It simple Stupid) when I do this I have greater results. I hope to see some of your projects posted here in the future.Here's a few shots of me making another vase to give you an idea how to go about this process.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.