Who are you
Hey All....

My names David, go by Dave most of the time... Just getting started in turning. Nice to meet everyone....

Dave
Reply
The name is Don Inghram Jr. I'll answer to Don or Jr. Please not Donald. Saving up for my first lathe. Got a little put back now and as soon as GW sends my tax rebate check I'll be calling Grizzly on the new alternative to Jet 12-20. Or, may just go with the 12-20.
The older I get the faster I was.
Reply
Walnuts...Aka Mike Hendershot...
tool pervert and woodhunter by day, knowledge seeker and wood peddler by night, soon I will update my lathe and my woodturning tools so I can actually turn something decent enough to post. I do enjoy, however, sawing into difficult hardwoods for sport .
Reply
Hi I'm Keith Koenig. I've been turning for 7 years. I turn mostly green wood. the bigger the better!!!!
Reply
Hello everyone; on all of the other WW'ing forums I post to, I go by Mack C. in Brooklin ON. (C is for Cameron).For some strange and unknown reason I registered on this one with one of my hobbies as a nick name.

I'm fully in agreement with Yak, it really is difficult putting a face to ert321. (my words not his)
Mack C. in Brooklin ON (Canada)
Reply
I am Randy, I started turning about 2 weeks ago after I retired from working in a Chemical plant in Louisiana moved to Missouri and started working in my dream job as a sawyer in a Hard Wood saw mill. Turning a bat out of Spalted Black Walnut for my second project. Talk about fun!!!

Going to my first Turning and Carving exhibit this weekend.
Reply
Newb I guess - been a looker for awhile.

I'm Mark, Marko to many. Not into turning yet - I'll read and learn, then turn. Mighty soon. Maybe get some gear over weekend.
Made to many lousy boxes in my life - time to do so creative things. Late 50's and ain't liking that fact either.
Weeks rush by like days from only back a wee bit and whole months now fly by like weeks once did. You best lend me a hand here - times a wastin'
No bull given. No bull expected.
Reply
I'm Robert Allen. I'll answer to "Dinner's ready!"

I just started wood turning about a month ago. Got a set of tools and a Delta Midi-lathe. Not a bad little machine.

Started out on scrap pieces of lumber and the like, then started cutting down dead trees around the property and using them. Now I'm getting into exotic woods and have turned out a few things I'll be putting photos up actually later today. So keep an eye out
Reply
Guess I should pony up since I have a "lathe" now (yes, I use the term loosely- it's less than awesome).

My name's Brandon Beakes. I'm 24, have a wife and by December will have 2 little ones. I have only just begun tinkering with turning but will be slowly collecting tools and knowledge and am very excited for what the future has to offer.

The thing that 'turned' me on to turning was probably, unfortunately, dealing with sub-par tools and methods for regular woodwork. The struggle for straight, level, parallel, blah blah blah blah blah... oh wait, what's this? Round? Smooth? Shiny? Warping and re-doing accepted and expected? A whole new set of standards to fall below? I'm in!

I'm a perfectionist by nature but mostly an "instant results" man in practice. It makes for very unusual conversations with myself in the basement in the middle of the night
You can turn an awful lot of stuff on that lathe. Or, if you are like me, you can turn a lot of awful stuff on it. -clovishound
Reply
DIYdappler said:

by December will have 2 little ones.



Oh boy... does this mean twins? If so I can sympathize.
Never, under ANY circumstances, make the last cut.

Three Seasons Woodturnings
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.