Posts: 40,215
Threads: 1
Joined: Nov 2004
07-28-2019, 10:29 AM
(This post was last modified: 08-18-2019, 04:59 AM by Bones™.)
Most never used; others once or twice
Veritas® Bullnose Plane, A2 140 SOLD
Leigh D4R Pro Dovetail Jig 475
VRS Support and Vacuum Attachment 109
Veritas® Mk.II Power Sharpening System 320
Extra 4mm Platter 12
Extra 1mm Platter 11
Extra Discs Various Grit 50
Veritas® RH Edge Plane, A2 Blade 90 SOLD
Veritas® Bevel-Up Smoother Plane, A2 200
Veritas® Low-Angle Jack Plane, O1 200
Veritas® Bevel-Up Jointer Plane, A2 245 SOLD
Veritas® Bevel-Up Jointer Fence 35 SOLD
129+200+Pair of RH & LH Skew Rabbet
Planes, A2 400
Veritas® String Inlay Scraper 60
Inlay Cutter Head for Veritas® Router Plane 53
Set of 5 Imperial Blades Inlay Cutter 62
Veritas® Cabinetmaker's Trimming Plane 129
Set of 7 Miniature Tools (Block Plane,
Shoulder Plane, Edge Plane, Router Plane,
Chisels, Spokeshave, Cabinet Scraper) 200 SOLD
Leigh FMT Pro 900
All the FMT joint guides including square 250
There is a wealth of knowledge, talent and experience here...and then there are the other members.
Life is too short to suffer fools.
Posts: 13,389
Threads: 4
Joined: Jun 2007
Location: New Jersey
Presume plus shipping or is it included?
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 21,255
Threads: 2
Joined: Mar 2009
Location: IA
Nice to see you around buddy. Hope you sell everything!!
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 40,215
Threads: 1
Joined: Nov 2004
Modest shipping costs, soon forgotten in the frenzy of fondling a new acquisition.
There is a wealth of knowledge, talent and experience here...and then there are the other members.
Life is too short to suffer fools.
Posts: 6,061
Threads: 0
Joined: Jan 2001
are u getting out of wodworking?
TODAY IS THE OLDEST YOU'VE EVER BEEN, YET THE YOUNGEST YOU'LL EVER BE, SO ENJOY THIS DAY WHILE IT LASTS.
Posts: 40,215
Threads: 1
Joined: Nov 2004
Not at all; just finished a curly cherry bookcase, a cherry and spalted maple sideboard, some saddle stands and a jewelry case on a stand. Gots me some utility hand tools that do what I need. Thought others might enjoy some fine tools.
There is a wealth of knowledge, talent and experience here...and then there are the other members.
Life is too short to suffer fools.
Posts: 14,639
Threads: 10
Joined: Jan 2010
Location: southeastern VA
PM sent (Monday) for bull nose plane and set of 7 miniatures.
"the most important safety feature on any tool is the one between your ears." - Ken Vick
A wish for you all: May you keep buying green bananas.
Posts: 22,339
Threads: 0
Joined: Dec 2004
Location: Monrovia, AL
(07-31-2019, 06:09 PM)iclark Wrote: PM sent (Monday) for bull nose plane and set of 7 miniatures.
Thank you, I was beginning to weaken on that bull nose plane. I was hoping it would disappear before I broke down.
"73 is the best number because it's the 21st prime number, and it's mirror 37 is the 12th prime number, whose mirror 21 is the product of 7 times 3. Also in binary 73 is 1001001, which is a palindrome." - Nobel Laureate, Dr. Sheldon Cooper
Posts: 6,674
Threads: 1
Joined: Jan 2003
Location: Southern California
Absolutely stunned that folks have not been climbing all over this stuff. I have what I need but thinking about the wants.
Thanks, Curt
-----------------
"Life can only be understood backwards; but it must be lived forwards."
-- Soren Kierkegaard
Posts: 2,955
Threads: 0
Joined: Oct 2007
Location: Cumming, GA.
You ever do any lumber runs anymore on your way to the highlands? I could use a small amount of Walnut 30-40 bd/ft or so. Really proud of that stuff up this way these days!