FS: Delta 14” Drill Press Parts

[Rick_B]

I ended up with a DP 220 Delta drill press head (serial # 17-9362 year 1942) with a broken spindle pulley, no motor (I robbed it for another press), no depth stop and it didn’t fit the column I had. So a decision has been made to part it out. All prices are before shipping - most of the items are pretty small/light so shipping should not be outrageous. Some of the items are logical groups of parts that I would like to sell as one unit (an example is the motor mounting plate and hardware) - however let me no if you are interested in individual Items (for example the motor mounting plate hardware). If things are not selling in a few weeks I would be inclined ton split them up.

Due to inexperience I may be out of line on pricing for some items so - ALL PRICES ARE NEGOTIABLE – I am motivated to not put the items back on a shelf. Of course, bigger discounts for multiple items. I can also assist with delivery within a reasonable distance of Winston Salem, NC

Picture 1

A - Motor mounting plate and hardware - $12 SOLD

Picture 2

B – Safety Collar - $15 SOLD

C – Head Lock - $15  SOLD

D - Quill Lock - $5

E – Switch on Head - $10

F – Slow Speed Pulley Bearing Retainer Plate and Screws - $5

G – Slow speed Spindle Pulley Sleeve and Cover - $25

Picture 3

J – Quill/Bearing Retainer Nuts/ Upper Spindle collar - $50

Picture 4

H – Pinion/Handle/Thumb Screw/Return Spring - $25

Picture 5

K – Spindle with Jacobs 6A 33 Taper Chuck (can’t get chuck off spindle – try your luck) - $30

Picture 6

L – WT Return Spring – Pinion hole on spring broke – case is good) - $5

M – Delta Return Spring – pinion end of spring bent – case is good - $5

I also have the head, table, table bracket, base and column (have not got the column out of the base yet) – didn’t think there would be much interest but let me know if you have a desire for them.

Thanks for looking
Rick

   

   

   

   

   

[Rick_B]

BTTT - make an offer

Rick

[Rick_B]

Another bump - these need to go so don't be afraid of insulting me with an offer.

Rick

[Rick_B]

And another bump - still looking f0or reasonable offers

Thanks for looking

Rick