Woodnet Forums
Hung Kitchen Cabinets too Low! - Printable Version

+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: Hung Kitchen Cabinets too Low! (/showthread.php?tid=7361683)

Pages: 1 2 3 4


RE: Hung Kitchen Cabinets too Low! - David Stone - 03-20-2021

(03-20-2021, 12:51 PM)fixtureman Wrote: Change the fridge hinge to the other side

I think my wife would cut my head off.


RE: Hung Kitchen Cabinets too Low! - TDKPE - 03-20-2021

Remove the tile under the fridge, pour a self-leveling compound in the space so it’s flat and level, and make a shallow ramp to allow the fridge to roll up onto the tile on the rare occasion it needs to?


RE: Hung Kitchen Cabinets too Low! - chrisntam - 03-20-2021

(03-20-2021, 11:54 AM)AUswimKC Wrote: Let’s see an overall picture of the kitchen

+1

I can't make out what your picture is...


RE: Hung Kitchen Cabinets too Low! - chrisntam - 03-20-2021

Get a shorter fridge.  Move the too tall one to the utility room, fill it with drinks.  Every home needs two refrigerators.


Yes


RE: Hung Kitchen Cabinets too Low! - Snipe Hunter - 03-21-2021

(03-20-2021, 05:05 PM)David Stone Wrote: I think my wife would cut my head off.

Yea, there's always that


RE: Hung Kitchen Cabinets too Low! - srv52761 - 03-21-2021

Had posted this earlier, but then realized my fridge is pretty old.  Had to check a different fridge.  
"The refrigerator is as low as it goes... With the leg levelers attached?  If it is like ours you can gain  another 1/4"-3/8" by removing the levelers.  If the fridge 's hinges are forward of the front levelers you can gain another maybe 1/8" by raising the back levelers some.
Edit: but you lose a level fridge."

Our fridge has leg levelers with those hdpe pads to help slide it back.  My son's fridge has rollers.  After inspection of his fridge you could remove the front rollers.

Refrigerators are designed to allow air to enter from under the fridge to help the transfer of heat from the coils.  You should have some space, even if it is as low as it goes.  Looks like you only need a little.

You could:
remove the front levelers/rollers
Cut a couple of milk containers to use the hdpe as glides under the fridge chassis
Slide the fridge into place, raise it with shims till the offending hinge(s) barely clears the door, 
replace the kick plate, shaving the bottom if necessary.

If you try this and it works I would not push the fridge all the way in, maybe by an inch.  You would be reducing the air flow from the front some.  I would give it the extra space in the back.  Keep it clean(you could raise it with shims again to clean)


RE: Hung Kitchen Cabinets too Low! - Roly - 03-21-2021

Have you thought about getting the dishwasher out from under the countertop yet ?   Could also be a issue.   Roly


RE: Hung Kitchen Cabinets too Low! - David Stone - 03-22-2021

Not much space here.  You’ll see why I can’t flip the door.  [attachment=34274]

[attachment=34275]

[attachment=34276]


RE: Hung Kitchen Cabinets too Low! - fixtureman - 03-22-2021

Reverse the cabinet swing


RE: Hung Kitchen Cabinets too Low! - David Stone - 03-22-2021

(03-22-2021, 06:57 AM)fixtureman Wrote: Reverse the cabinet swing

?