+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: walnut chest (/showthread.php?tid=7123744)
walnut chest - chips ahoy - 10-20-2015
A friend of mine is refinishing a walnut chest and asked me about a finish. I am not much into flat stuff, but did suggest spray lacquer, several coats, then rubbed with 0000 steel wool. Then maybe rub in a coat of carnuba wax and buff it. What are your thoughts on this and any other finishes would be very helpful. Thanks
Mel
Re: walnut chest - JR1 - 10-21-2015
Walnut has prominent pore which need to be filled for a writing surface but IMHO this is detrimental to the wood. For something like a chest I would not consider using a grain filler, it only dulls the wood, and adds extra time and expense.
I'd use garnet shellac .or Ruby or Thai seed for a reder color. This will pop the grain with one to 3 1# cut coat and is very easy to apply. If he is not expecting heavy use then he is done. Otherwise he can topcoat with a good waterborne like Crystalac premium or GF HP/EnduoVar, They are very easy to use.
Re: walnut chest - fredhargis - 10-21-2015
Lacquer isn't going to be as durable as some of the other choices, although it does provide a nice looking finish. I'm guessing that if he's refinishing he's already stripped the existing finish)?). If true, the grain is already filled (or at least sealed) and just going to the top coat of his choice is not a bad approach. Garnet shellac would add some color if needed, but I think maybe just the topcoat...if he needs something more durable maybe a good alkyd varnish (might add an unwanted color element) or a waterborne (water clear finish if he chooses the right one). Otherwise the lacquer would be easy to apply and look nice.
Re: walnut chest - woodsman83192 - 10-21-2015
The look of a Watco Danish Oil (Light or Med Walnut) looks great on reclaimed Walnut IMO. Let that coat dry a few days and top coat with anything. I like Endurovar on walnut or any oil based poly in a wipe-on formula.
Something about tinted Danish Oil on Walnut is really an easy, sure thing for me. Again, my humble opinion. YMMV.
Jake
Re: walnut chest - chips ahoy - 10-21-2015
Thanks for the suggestions, I have passed them on.
Mel
Re: walnut chest - Bill Lyman - 10-21-2015
I just built a walnut chest and applied 23 coats of Waterlox polyurethane wipe on varnish, rubbed out with steel wool at the end and applied paste furniture wax to the top. Many less coats on the panels and legs. No end of problems with the Waterlox streaking, and time consuming, but in the end it has a deep finish satin finish.