+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Bishop saw etch (/showthread.php?tid=7132513)
Bishop saw etch - clydeone - 10-31-2015
Was cleaning up a Bishop saw - and much to my surprise I managed to get a partial etch to appear - now I want to see a clean picture of the etch
Untitled by BowmanD67, on Flickr" />
Re: Bishop saw etch - Joe Bailey - 10-31-2015
not the greatest pics, but ...
Re: Bishop saw etch - Daryl Weir - 10-31-2015
Here ya go....from a few years back!
Re: Bishop saw etch - clydeone - 10-31-2015
Thank you - Joe and Daryl - it looked like an interesting etch. If I finish cleaning it up I will post some pictures later. I am still trying to get the bulk of the rust off the remainder of the saw and will then switch to 600 grit and see if can expose more of the etch - very carefully