Emmert K1 Vise Parts Question - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Emmert K1 Vise Parts Question (/showthread.php?tid=7271943) |
Emmert K1 Vise Parts Question - deeno - 04-25-2016 I just restored the subject vice. It is missing the tilt adjustment bracket and tilt adjustment lever. Anybody have one that they want to sell? Please PM. thanks. Dennis Re: Emmert K1 Vise Parts Question - PCG - 04-25-2016 I bought the missing parts for my Emmert here http://www.mprime.com/Emmert/forsaleCS.htm Re: Emmert K1 Vise Parts Question - dustyrag - 04-26-2016 PCG said: I've bought parts from the same source with equal success. Re: Emmert K1 Vise Parts Question - ncosman - 04-26-2016 Check out what I brought back from Philly last weekend. I'm not sure I needed two, but for $20 bucks each the price was right Nothing's damaged or missing and the mechanisms are all free and smooth. They are just a bit dusty and dirty (the orange color is dust not rust). All they need is some WD-40 and a pair of benchs built around them! Hail the Iron Gods! Re: Emmert K1 Vise Parts Question - EatenByLimestone - 04-27-2016 Sweet! Re: Emmert K1 Vise Parts Question - deeno - 04-27-2016 Wow those are nice and for the price you stole them... Thanks everyone for the link. I will check it out. Re: Emmert K1 Vise Parts Question - Boatman53 - 04-28-2016 Deeno if you want anyone else second in line,when I first got my K1 it was missing the bench part just like yours so I started making this from aluminum. I never needed to finish because I came across another but broken one for very cheap that had the parts I needed. It's your or anyone else's for the price of shipping. I know I'll never use it. Just needs a couple of holes drilled and some bolts to tie it all together. Sorry I'm a little late to the party. Jim Re: Emmert K1 Vise Parts Question - deeno - 04-29-2016 Boatman, thank you very much for your generosity. It really is very much appreciated. I will have to decline as I do not want to be a glutton and end up with 2. Yesterday I ordered some flat stock from Enco. They had 15% off + free shipping no minimum order. I decided to try my hand at welding up a simple bracket. I started the bench modification last night and should have the vise less the tilt bracket in before the weekend is over. Re: Emmert K1 Vise Parts Question - Boatman53 - 04-29-2016 No problem, as I said late to the party. Perhaps someone else watching this thread can put it to service. The offer is still open. Jim |