What to do with a brand new Stanley #5 Handplane - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: What to do with a brand new Stanley #5 Handplane (/showthread.php?tid=7325718) |
What to do with a brand new Stanley #5 Handplane - macpiano - 11-30-2016 A couple years ago the yoke in my Stanley #5 Handplane broke. In the ensuing time I bought Wood River #4, #5, #6, and #7 handplanes. So the other week I sent that little yoke back to Stanley and they sent me a whole brand new #5 Handplane. Is there any good reason to keep a 2nd #5 or should I sell it? thanks RE: What to do with a brand new Stanley #5 Handplane - enjuneer - 11-30-2016 Grind a heavy camber into the iron and use it as a scrub plane. Lots of folks use a No. 5 for this purpose. RE: What to do with a brand new Stanley #5 Handplane - Alan S - 11-30-2016 They are cheap. I like to keep several around for a couple of reasons. First, they are cambered to different extents, so I can grab the one I want. Sharpened straight across, it works well to shoot the ends of boards using a bench hook and running the plane on the bench. Most work rough uses the moderately cambered one, but I also have a #5 with a severely cambered blade. Second, if someone visits and gets interested in hand tool woodworking, a spare #5 is very nice to have around to give or sell to an interested beginner. RE: What to do with a brand new Stanley #5 Handplane - Bibliophile 13 - 12-01-2016 Keep it as a loaner. If somebody asks to borrow a plane, hand him that one. RE: What to do with a brand new Stanley #5 Handplane - EricU - 12-01-2016 I have a new Stanley 5c that is the most useless plane I have ever bought. Sole has a crazy twist. Of course, when I say "new" it means that it's 25 years old, but it hasn't been put to wood very many times. Plastic handles don't do much for me either I have a LN scrub plane, which is one of my favorite tools. Not sure what else I would do with the Stanley, but replacing the LN is not it RE: What to do with a brand new Stanley #5 Handplane - rwe2156 - 12-05-2016 (11-30-2016, 02:32 PM)enjuneer Wrote: Grind a heavy camber into the iron and use it as a scrub plane. Lots of folks use a No. 5 for this purpose. YES!! Other than that its a POJ. RE: What to do with a brand new Stanley #5 Handplane - Strokes77 - 12-05-2016 (11-30-2016, 02:28 PM)macpiano Wrote: A couple years ago the yoke in my Stanley #5 Handplane broke. In the ensuing time I bought Wood River #4, #5, #6, and #7 handplanes. So the other week I sent that little yoke back to Stanley and they sent me a whole brand new #5 Handplane. Is there any good reason to keep a 2nd #5 or should I sell it? thanks Pretty good customer service right there. I like that. RE: What to do with a brand new Stanley #5 Handplane - hbmcc - 12-05-2016 My "new" (30 yrs.) #4 spent a few years as a paper weight, and then was tossed into the recycle bin. It's probably causing someone grief as a 'Made In China' shower curtain rod. RE: What to do with a brand new Stanley #5 Handplane - Downwindtracker2 - 12-05-2016 I have a 6"x48"/9" belt disc sander so Stanley soles up to #5s are no problem. Tom probably has a better way. I have a crude Footprint #5 that will become a scrub. RE: What to do with a brand new Stanley #5 Handplane - Bill Lyman - 12-06-2016 Hone a square blade on one and use it for a dedicated shooting plane, or put a high angle frog in one and a regular frog in the other. |