What oil to use--Powr Kraft Vintage jawsaw-now called scroll saw - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: What oil to use--Powr Kraft Vintage jawsaw-now called scroll saw (/showthread.php?tid=7329775) |
What oil to use--Powr Kraft Vintage jawsaw-now called scroll saw - Highdesertww - 04-25-2017 I have a Ward Powr-Kraft 26" cast-iron arm scroll saw (labelled as jigsaw). The arm does not move; only the bottom end moves. The bottom uses an oil-fill box. It is low now I think. Should I use the thicker gear oil (as for manual transmission for cars) or the thinner motor oil? Is there a general rule for this to whether use gear oil (thicker) or motor oil if you don't known specifically? Thanks RE: What oil to use--Powr Kraft Vintage jawsaw-now called scroll saw - Lynden - 04-26-2017 The manual for a vintage Powr-Kraft 12" scroll saw recommends SAE 30 or 40 oil. http://vintagemachinery.org/pubs/657/16618.pdf My newer 12" Powr-Kraft saw looks like this one. I use SAE 30 oil (non-detergent). http://vintagemachinery.org/photoindex/detail.aspx?id=6406 RE: What oil to use--Powr Kraft Vintage jawsaw-now called scroll saw - Robert Adams - 04-26-2017 What Lynden said. Non detergent oil is best in this application. Course back in the day they probably used whale oil.... |