+- Woodnet Forums (https://forums.woodnet.net)
+-- Thread: How To? Mount a router on a Grizzly Table Saw (/showthread.php?tid=7330207)
How To? Mount a router on a Grizzly Table Saw - opticsguy - 05-13-2017
Just set up my Grizzly G1023RLW table saw with the router table. The instruction booklet says to read the router table manual for router installation but there seems to be no such booklet.
So, has anyone mounted a router to their Grizzly saw table and how?
Thank you!!!
RE: How To? Mount a router on a Grizzly Table Saw - Lynden - 05-14-2017
Is this the manual you need?
http://cdn0.grizzly.com/manuals/h7507_m.pdf -- Mounting Router, Page 13
http://www.grizzly.com/products/Router-Extension-Table-for-Table-Saw/H7507?utm_campaign=zPage&utm_source=grizzly.com -- Manual PDF
RE: How To? Mount a router on a Grizzly Table Saw - opticsguy - 05-14-2017
Lynden, You are the very very best!!!!!!!
Thank you!!!!!!!
RE: How To? Mount a router on a Grizzly Table Saw - Steve N - 05-14-2017
Available now, and using the table insert it offers 4 different rings you can mount in the insert. You could contact both to find exact sizes of the hole diameter. Check that against any bit diameter you think you might use. One thing for sure is if it's on a table insert, you can always put in a different insert to accept virtually and diameter bit. On the Griz if you get a bit larger than their biggest hole diameter, you are s*&^^ed.