FS: Delta 12" Disc Sander - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: FS: Delta 12" Disc Sander (/showthread.php?tid=7331803) |
FS: Delta 12" Disc Sander - Rick_B - 07-18-2017 As a result of a new acquisition this machine is now excess to me. 3/4 HP 3 Phase motor (badged Delta Double Duty) currently wired for 220 volt. It is the quietest and smoothest running motor I have. 12" disc. Tilting table and tilt mechanisms/clamps are all in excellent condition. Welded Delta stand. Shop made adapter and port for dust collection. I have a few discs I can include. The machine was completely disassembled, cleaned, painted and new motor bearings when I got it and has seen only limited use since then. It is currently powered through a VFD which is not included but is pretty reasonable to buy for this HP motor. It sits on a shop made mobile base that I will include. I can get additional pictures if desired. With the current photo bucket disaster and my inability to post pictures here - I can send photos to you if interested Looking to get $300 but would entertain reasonable offers. I can assist with delivery in the Winston Salem, NC region. Thanks Rick [attachment=3229] [attachment=3230] [attachment=3231] [attachment=3232] RE: FS: Delta 12" Disc Sander - jasfrank - 07-18-2017 That's nice and reasonable RE: FS: Delta 12" Disc Sander - Randy B. - 07-18-2017 That's a sexy beast right there! RE: FS: Delta 12" Disc Sander - Rick_B - 07-18-2017 Thanis guys - I forgot to mention with the vfd the disc can spin in either direction. Nice feature for certain types of work Rick RE: FS: Delta 12" Disc Sander - FrankAtl - 07-19-2017 Dang! I wish you were closer to Atlanta. I've been looking for a sander like this and I already have a VFD. Any plans on coming close to Atlanta anytime soon? RE: FS: Delta 12" Disc Sander - Rick_B - 07-19-2017 (07-19-2017, 07:40 AM)FrankAtl Wrote: Dang! I wish you were closer to Atlanta. I've been looking for a sander like this and I already have a VFD. Any plans on coming close to Atlanta anytime soon? Actually I am Frank - that is where I am picking up my new machine. I sent you a PM RE: FS: Delta 12" Disc Sander - Rick_B - 07-19-2017 Sold - pending payment RE: FS: Delta 12" Disc Sander - Slav Jelesijevich - 01-14-2018 It’s got a 1725 motor, table adjust to 45 degrees. They were designed for metal or wood. If you put a vfd on it you can slow it down to a crawl if your doing very small work. This is a very good machine at a good price. Made that for many years, you can get parts easily or find a single phase motor to put on it. Slav |