shopping for Evolution chop saw - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: shopping for Evolution chop saw (/showthread.php?tid=7332254) |
shopping for Evolution chop saw - alsayyed - 08-05-2017 Hello everybody, I shopping for evolution chop saw that cuts steel, but I have found 3 or 4 types of these machine but I have read about but still did not get any plenty of knowledge regarding these machine. I am thinking for the evolution rage 2 And there is another that looks like the miter saw that is multipurpose And there is a rage 3 So I am asking your help to find out which I should go for Thank you I appreciate your help. RE: shopping for Evolution chop saw - Steve N - 08-05-2017 What type of metal, what thickness? On your other post I put in a link for their blades, which clearly differ dependent on use. They also have links for the saws doing the same. I don't get the impression they have a "do it all tool" if they do that part was missed. The RPM values seemed different on what the blades would run best at, and the machines also were different. I think maybe if you did it all, they would be happy that you owned several of their machines. I know a lot of people who cut varied metals with a much less expensive "chop saw" using solid blades, have you considered this, or are you absolutely sold that you need an Evolution? What I see most often is this for light work. DeWalt D28710 14" chpper Some really sloooooo talkinggggg videos at lower end of page, before comments. Blades/discs are cheap, you just need to let the tool do the work, rushing this is not For cutting of most any metals, quickly, and SAFELY a metal cutting horizontal chop bandsaw, prices are all over the place, but this kind of saw. |