+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Removing a Veritas plow plane handle? (/showthread.php?tid=7334681)
Pages:
1
2
Removing a Veritas plow plane handle? - Mike Brady - 11-12-2017
I would like to make a different handle and a matching fence for my Veritas (sm) plow plane. I probably would go a bit larger than the current one. I remember someone from the company mentioning that the stock handle is fastened with a threaded fastener and some epoxy adhesive. Epoxy can be loosened with heat but the powder-coated black finish on the plane would be at risk if a heat gun is employed. Anyone have experience or knowledge of this? I have made numerous Stanley plane handles, so the woodworking part is not a concern, although I might make the handle first before I undo anything on the stock plane, because I suspect that the removal is not reversible.
RE: Removing a Veritas plow plane handle? - Admiral - 11-12-2017
I don't think you are the first to want to do this. Call up LV technical support, they are pretty good and if someone else has asked about how to do this, and did it, this they might have some valuable insights. And the nice thing is if they don't know offhand, they go ask the production people and will call you back.
RE: Removing a Veritas plow plane handle? - Mike Brady - 11-12-2017
(11-12-2017, 10:28 AM)Admiral Wrote: I don't think you are the first to want to do this. Call up LV technical support, they are pretty good and if someone else has asked about how to do this, and did it, this they might have some valuable insights. And the nice thing is if they don't know offhand, they go ask the production people and will call you back.
I thought about doing that, but I am still stinging from being chastised on another forum for "wasting the time of a (different) manufacturer by calling with questions". A friend of mine just broke the handle on his new combination plane, so he is going to call them for advise about that, and can ask for me. Perhaps the best answer is to just leave it alone.
RE: Removing a Veritas plow plane handle? - hbmcc - 11-12-2017
Derek C. may have done something with his. He is always modifying LV totes.
RE: Removing a Veritas plow plane handle? - Rob Lee - 11-13-2017
(11-12-2017, 10:44 AM)Mike Brady Wrote: I thought about doing that, but I am still stinging from being chastised on another forum for "wasting the time of a (different) manufacturer by calling with questions". A friend of mine just broke the handle on his new combination plane, so he is going to call them for advise about that, and can ask for me. Perhaps the best answer is to just leave it alone.
Mike -
If you don't call our service folks...we'll have to let them go....
Shoot me your email address at rlee@leevalley.com , and we'll get the answer to you.
Cheers -
Rob
RE: Removing a Veritas plow plane handle? - Mike Brady - 11-13-2017
Thank you, Rob, and will do!
RE: Removing a Veritas plow plane handle? - iclark - 11-13-2017
And this is part of why I love LV and deeply respect and appreciate Rob Lee.
I just read Mike's post about the wrist slap and Rob's answer to LOML and she shares my appreciation that customer care does not get any better than this anywhere.
RE: Removing a Veritas plow plane handle? - Mike Brady - 11-13-2017
(11-13-2017, 03:12 PM)iclark Wrote: And this is part of why I love LV and deeply respect and appreciate Rob Lee.
I just read Mike's post about the wrist slap and Rob's answer to LOML and she shares my appreciation that customer care does not get any better than this anywhere.
I have already completed a couple of exchanges of info with their tool designer. That is service par none.
RE: Removing a Veritas plow plane handle? - Chuck Nickerson - 11-13-2017
For a small fee LV will special order a few of those metal dodads that attach the handle to the frame.
Somewhere in my shop four of them are taunting me as yet another project-in-progress.
RE: Removing a Veritas plow plane handle? - Mike Brady - 11-13-2017
(11-13-2017, 05:16 PM)Chuck Nickerson Wrote: For a small fee LV will special order a few of those metal dodads that attach the handle to the frame.
Somewhere in my shop four of them are taunting me as yet another project-in-progress.
Chuck is referring to a threaded insert that is epoxied into the wood handle. A cap screw holds the assembly to the frame, and it has thread-locker on it which can be stubborn to loosen. Heat will loosen it but heat is not a good idea around powder coat paint and lacquer wood finish. I have to decide if all of this is worth the risks involved.