+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: bandsaw identification (/showthread.php?tid=7337123)
bandsaw identification - norm_ahram - 02-05-2018
Can someone identify this bandsaw model so I can try to find an instruction manual. The throat is 12", and the distance between the table and upper blade guide is about 6".
The bandsaw is so dirty and rusty, and the rubber tires are so worn out, I can understand now why nobody bid on it on ebay.
Is this bandsaw worth restoring, or should I just take it to the dumpster? It only cost 99 cents (the starting bid), and it came with a 1/3 HP motor that's in good condition, so I wouldn't be too upset if I have to scrap it.
RE: bandsaw identification - TDKPE - 02-05-2018
Looks like an Atlas 912.
RE: bandsaw identification - TDKPE - 02-05-2018
http://vintagemachinery.org/pubs/51/726.pdf
http://vintagemachinery.org/photoindex/detail.aspx?id=5937
At 125 lb just for the saw, it's heavier than my 1940's Craftsman 12" BS, which is about 100 lb sans motor and stand.
RE: bandsaw identification - dgman - 02-05-2018
That is an excellent bandsaw...please do not trash it. It is well worth restoring...pretty much just new bearings and a clean up. The wheels themselves are crowned so all you have to do is replace the tires. I have one and it works very well.
RE: bandsaw identification - EvilTwin - 02-06-2018
Looks like you are getting into OWWM. Is that a Duro 16 in the background of one of the pix?
That is a nice little saw you picked up. I've never had an Atlas, though I've heard nothing but good things about them. Atlas is now Clausing so you could say they are currently in business. It is a good candidate for restoration.
RE: bandsaw identification - Bob Vaughan - 02-06-2018
There is no better built 12" band saw that I know of. Its well worth restoration activity and expense.
Here's an "as found" photo of one I got. You paid 99¢ more than I did, but once the restoration was done, it is priceless. My son used it for several years before he got a 14" with a riser block. One of his friends has had it for many years now and he loves it. He says it is his most favorite machine in his whole workshop. It is quiet and smooth.
[attachment=7945]
The restored version.
[attachment=7946]
RE: bandsaw identification - norm_ahram - 02-07-2018
TDKPE - thanks for the instruction manual and the link to the vintage machinery website, it's exactly what I need
dgman - the original tires are rubber. Should I replace with rubber, or urethane tires?
EvilTwin - yes, that's a Duro 15" bandsaw I picked up on Craigslist for $150 a year ago.
Bob - I've never restored any woodworking machines before, but I'll try to restore this one if this bandsaw is as good as everyone seems to think it is
thanks again for everyone's advice
RE: bandsaw identification - dgman - 02-08-2018
I put urethane tires on the wheels when I replaced mine. They went on easily ....no glue... and seem to be working quit well.