Replacement filter for my Griz 1029 - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Replacement filter for my Griz 1029 (/showthread.php?tid=7337397) |
Replacement filter for my Griz 1029 - gramps408 - 02-15-2018 Need to replace the Jet filter on my Grizzly 1029 and wondering what would be a good replacement. I'ts 10 or more years old and wondering what options I would have. Starting to see dust in the air and on everything. Thanks for any advice RE: Replacement filter for my Griz 1029 - photobug - 02-15-2018 (02-15-2018, 12:38 AM)gramps408 Wrote: Need to replace the Jet filter on my Grizzly 1029 and wondering what would be a good replacement. I'ts 10 or more years old and wondering what options I would have. Starting to see dust in the air and on everything. Thanks for any adviceNot sure what model my Griz is but looks like the G1029. I built it into a custom collector with a cyclone separator. I used a Wynn Environmental filter. A canister will get you a dust collection close to HEPA filter filtration with 2 times the air flow through of a 2 bag set of filters. I think this filter should fit your needs but if you want to call Wynn and ask for technical support you will talk to Mr Wynn himself. https://wynnenv.com/woodworking-filters/new-222-filters/ RE: Replacement filter for my Griz 1029 - Lynden - 02-15-2018 Along with replacing the filter, do you plan to upgrade your G1029 by adding a Thien baffle? A Super Dust Deputy? http://www.jpthien.com/smf/index.php?topic=71.0 https://www.woodcraft.com/products/oneida-air-systems-molded-super-dust-deputy-cyclone?gclid=EAIaIQobChMIx_7ggLin2QIVhmB-Ch0FdQ9MEAYYASABEgJj5vD_BwE The Wynn 35A and 35B filters are the same size and both will fit your G1029. https://wynnenv.com/woodworking-filters/cost-overview/ RE: Replacement filter for my Griz 1029 - photobug - 02-15-2018 (02-15-2018, 03:01 AM)Lynden Wrote: Along with replacing the filter, do you plan to upgrade your G1029 by adding a Thien baffle? A Super Dust Deputy? That's what I am doing now. RE: Replacement filter for my Griz 1029 - gramps408 - 02-17-2018 thanks guys, much appreciated, I just ordered the Wynn filter |