+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: More spring cleaning (/showthread.php?tid=7339486)
More spring cleaning - bandit571 - 05-11-2018
Once I had the worst of the mess cleaned out....still had some areas needed cleared away..
[attachment=10315]
Everything under this cabinet, and under the bench was swept away..
[attachment=10316]
Was a big mess back in there. It is where that plough plane was rediscovered.
[attachment=10317]
Old, unused bandsaw was stashed back there....there was room to also place a router table back there, once the old window frames were moved aside..
[attachment=10318]
Shop now has it's own, dedicated trash can!
With a brand new dust pan, and a hand broom to clean off all the flat areas..[attachment=10319]
I guess this counts as a "Before" picture? Stay tuned....the entire job took almost a full week of work...
RE: More spring cleaning - bandit571 - 05-11-2018
Ok, part 2...
[attachment=10320]
Cleaned the floor....
Cleared the top of the shop dresser..[attachment=10321]
Had something better to stash there..
[attachment=10322]
Lots of parts and small tools can hide in there, now. Rearranged a shelf in front of the brand new drill til..
[attachment=10323]
Couple of boxes to hold the joinery planes, and a "book" of auger bits. I later restacked the cases, to allow that Fancy box of Pine a place to sit...can now turn away from the bench, and every tool I may need is at arm's length..I did manage to get the router tabel into it's new home....
[attachment=10324]
The stand under the Stanley #2246 mitre box, is the one that came home with the Langdon ACME 75 mitre box....The Boss had been using the stand for flowers on the back porch...forgot how heavy the dang thing was...until I had to haul it down the steps to the shop..now I can use this "smaller" mitre saw to cut down long boards, and save the piece work for the No.75. We getting there...2, 55 gal. trash bags, 2, 35 gal trash bags, 3 trips with the trash can....Fire pit running about every other night...
Stay tuned, more to go..
RE: More spring cleaning - bandit571 - 05-11-2018
Part 3...almost a weeks worth of work..
[attachment=10325]
Floor WAS swept....but this area needed a lot of work done....
[attachment=10326]
Looks a little better?
[attachment=10327]
Found an UGLY old rug....rather than throw it away..decided to have something to stand on...
I noticed there wasn't any lights over the "new" mitresaw station..so...
[attachment=10328]
And now I can see not only all the "extra" saws,......
[attachment=10329]
It is right above the Mitrebox. I can see what I am doing, not only here, but at the langdon station as well.
Kind of a "Nickle Tour"...the hard part will be keeping it this way....That 3' x 8' reclaimed space will also hold the trash can....
All this was going on, I still cleaned and sharpened a few saws....came home from an auction with 7 saws to rehab. I also had that Box of fancy Pine to do.
And a Trivet
Haven't really taken any wide views of the shop....I suppose I could, if anyone wants.
Thanks for looking in...
RE: More spring cleaning - Arlin Eastman - 05-12-2018
(05-11-2018, 09:28 PM)bandit571 Wrote: Once I had the worst of the mess cleaned out....still had some areas needed cleared away..
Everything under this cabinet, and under the bench was swept away..
Was a big mess back in there. It is where that plough plane was rediscovered.
Old, unused bandsaw was stashed back there....there was room to also place a router table back there, once the old window frames were moved aside..
Shop now has it's own, dedicated trash can!
I guess this counts as a "Before" picture? Stay tuned....the entire job took almost a full week of work...
You missed a lot there.
You need one of those leaf blowers.
RE: More spring cleaning - bandit571 - 05-13-2018
Was bad enough, after I took an air nozzle and blew out all the dust IN the furnace.....Had the pilot light out, and the gas to it shut off..until next fall....
Had to let all that settle down, and then swept the floor again.
Need to go and buy some lumber....Boss wants a new bedframe built...and a head board....
Also wants a small bedside table built.....
RE: More spring cleaning - bandit571 - 05-14-2018
Most of the lumbe for the queen sized bed frame is sitting in the house, getting used to the place. Will start a "build thread" when the rest of the lumber gets here.
Now, about this cleaned up shop...when you walk down the steps to the basement (be sure to duck your head) this scene is what you will see..
[attachment=10382]
Peek around the corner to the left...
[attachment=10383]
Finally get to the floor, and face to the "North"..
[attachment=10384]
Then walk that way a bit, until you are just past the bandsaw..
[attachment=10385]
Almost all of the "needful things" are within an arm's reach, while working here...
[attachment=10386]
where most of the work gets done.
And that be the $0.05 Tour.