+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: June Rust Hunt finds... (/showthread.php?tid=7339969)
June Rust Hunt finds... - bandit571 - 06-03-2018
were a bit ....skimpy....bought three "Channel-lock" type pliers...$3 total...
Picked a chisel for $2...
[attachment=10771]
1-1/2" Defiance by Stanley....and a brace, for $4
[attachment=10772]
Stanley No. 945, 8" have since rehabbed the brace up
[attachment=10773]
Looks about like my 10" Stanley.....rehabbed the chisel mainly to get rid of the mushroom and re-handle it..
[attachment=10774]
Still needs the edge sharpened....has a back bevel, and a reverse camber to the edge..
[attachment=10775]
Might take a while, and a gallon of water beside the grinder...
Hit & Miss Rust Hunt....
RE: June Rust Hunt finds... - bandit571 - 06-07-2018
Ok, that 1-1/2" wide chisel has been fully rehabbed..
[attachment=10884]
Sharpening tools. Edge has been ground straight, and that dumb looking back bevel removed...
[attachment=10885]
Cleaned up nicely..
[attachment=10886]
Stamp on the socket says it is a Defiance by Stanley Made in USA.
Maybe from the 1930s era...
RE: June Rust Hunt finds... - Christian Castillo - 06-09-2018
(06-07-2018, 09:17 PM)bandit571 Wrote: Ok, that 1-1/2" wide chisel has been fully rehabbed..
Sharpening tools. Edge has been ground straight, and that dumb looking back bevel removed...
Cleaned up nicely..
Stamp on the socket says it is a Defiance by Stanley Made in USA.
Maybe from the 1930s era...
Nice haul! I'm a big fan of wider chisels for pairing and trimming jobs.
RE: June Rust Hunt finds... - bandit571 - 06-10-2018
Still June, so..one more find...it was THAT skimpy of a day...
[attachment=10925]
Logo says it is a Sargent 408.....spent $8 on it...had to supply the front knob and bolt....just the threaded post was left..
Cleaned it up..
[attachment=10926]
Almost everything says it is a type 2...except..
[attachment=10927]
A frog from an Ohio No.0-3 plane? Rear handle is Rosewood. Logo on the iron is the first one used by Sargent. Under the lever cap?
[attachment=10928]
Dot went away after 1909. Washers on the frog bolts had rusted to the bolts. Been a long time since those were moved. Base?
[attachment=10929]
Still, for just $8, I may just sharpen it up, and put it to work....It'll give the Millers Falls No.8 a rest...