Woodnet Forums
Help finding hand held spindle sander - Printable Version

+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Help finding hand held spindle sander (/showthread.php?tid=7341189)

Help finding hand held spindle sander - Gary386 - 07-23-2018

I am building a Cole Rocker (chairguy.net) and am looking for a product that I saw recently, but can't fine it again.

I need a spindle sander that can be chucked into a hand held drill. The one that I saw has a disk (bearing) on the end. This disk can be held by hand (does not rotate) This allows two handed operation for drum sanding.

I can probability build one, but I'd rather buy it. Cost was less than $20.

Any help would be appreciated.

P.S. Has anyone else built this rocker? 
      How can I contact "the Chair Guy"?

RE: Help finding hand held spindle sander - MarkSingleton - 07-23-2018

http://www.grizzly.com/products/Handheld-Oscillating-Spindle-Sander/T27961

RE: Help finding hand held spindle sander - CARYinWA - 07-24-2018

http://www.grizzly.com/products/7-1-2-x-2-1-4-Handheld-Pneumatic-Drum-Sander/D4595

RE: Help finding hand held spindle sander - giradman - 07-24-2018

Amazon is selling the two sizes shown below (likely available elsewhere - just google 'handheld spindle sander'); also a video if you want to make your own?  Dave
Smile


.

RE: Help finding hand held spindle sander - Gary386 - 08-13-2018

(07-24-2018, 11:41 AM)giradmanThanks to all responders.Dave, I decided to build my own similar to the one described. I used a 2" dowel and added bearings in each end. Wrote: Amazon is selling the two sizes shown below (likely available elsewhere - just google 'handheld spindle sander'); also a video if you want to make your own?  Dave
Smile


.