+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: All you need to know about CBN wheels (/showthread.php?tid=7345119)
All you need to know about CBN wheels - Timberwolf - 12-18-2018
https://www.youtube.com/watch?v=IOXXiPK1L4s
RE: All you need to know about CBN wheels - Kansas City Fireslayer - 12-24-2018
Great video. Makes me want a set of them. I wonder what RPM grinder he was using?
RE: All you need to know about CBN wheels - cputnam - 12-24-2018
Where does one get the tubular tool rest? Does not come with the grinder.
RE: All you need to know about CBN wheels - Kansas City Fireslayer - 12-24-2018
I’m pretty sure it’s a Tormek and I believe I read Tormek offers a kit for this kind of thing.
RE: All you need to know about CBN wheels - Timberwolf - 12-24-2018
(12-24-2018, 07:33 PM)Kansas City Fireslayer Wrote: Great video. Makes me want a set of them. I wonder what RPM grinder he was using?,,,,,,,,,,,,,,,,,,,,,,
Not sure what speed he was using but I have a two-speed grinder { 1725/3450 } and I much prefer the slower speed of 1725rpm..The wheel I have is 180grit at 8" diameter...A six inch diameter should work fine on smaller 3450rpm grinders..I recommend only the 180grit...And never use it on any metal other than hardened steel..If it is hard, it does not have to be HSS..It doesn't "wear away" like a vitrified wheel and you cannot "dress it", so metal swarf can cause it to load up...They are a joy to use.....
RE: All you need to know about CBN wheels - Derek Cohen - 12-24-2018
I posted this information some years ago. In fact, Stumpy's set up is a copy of mine.
Article: http://www.inthewoodshop.com/WoodworkTechniques/UltimateGrindingSharpeningSetUp.html
At the time I posted this, only some turners were familiar with cbn wheels. They have been around a long time. As far as I am aware, my article was the first blog on their advantages for flat woodworking.
![[Image: UltimateGrindingSharpeningSetUp_html_5c5d41f4.jpg]](http://www.inthewoodshop.com/WoodworkTechniques/UltimateGrindingSharpeningSetUp_html_5c5d41f4.jpg)
Please read it to avoid purchasing the wrong wheel.
Regards from Perth
Derek
RE: All you need to know about CBN wheels - Timberwolf - 12-24-2018
(12-24-2018, 09:32 PM)Derek Cohen Wrote: I posted this information some years ago. In fact, Stumpy's set up is a copy of mine.
Article: http://www.inthewoodshop.com/WoodworkTechniques/UltimateGrindingSharpeningSetUp.html
At the time I posted this, only some turners were familiar with cbn wheels. They have been around a long time. As far as I am aware, my article was the first blog on their advantages for flat woodworking.
Please read it to avoid purchasing the wrong wheel.
Regards from Perth
Derek
......................
I remember you posting your experience with these wheels, Derek and it helped me with the decision to buy one a few years after you posted....I have some lathes but didn't buy it to sharpen lathe chisels....I sometimes use it for hollow grinding knife blades and it works well for that...Your post is outstanding....
I also liked you clever use ot the Tormek guide bars and may someday make something to utilize one on one of my wheel or belt grinders.
Like you, I love diamond paste and have used it for fifty years in my lapidary hobby and also sharpening...but a couple of years ago I bought some CBN powder to experiment with honing on a cast iron plate..The powder turned out to be too coarse and I have not been able to locate a source for a small quantity of a finer grit size..so I can't compare it to the results I get with diamonds.
RE: All you need to know about CBN wheels - Huxleywood - 12-31-2018
Even more, info to help the descent into the rabbit hole that is CBN.
This is from Reed Gray aka robohippy
CBN wheel info
RE: All you need to know about CBN wheels - Timberwolf - 12-31-2018
(12-31-2018, 12:15 AM)Huxleywood Wrote: Even more, info to help the descent into the rabbit hole that is CBN.
This is from Reed Gray aka robohippy
CBN wheel info
......................
Very informative....Lots of new information........thanks..