New wood river 5 1/2 jack plane - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: New wood river 5 1/2 jack plane (/showthread.php?tid=7345519) |
RE: New wood river 5 1/2 jack plane - Tony Z - 01-12-2019 (01-12-2019, 11:49 AM)Stwood_ Wrote: I'm actually thinking of doing a cad drawing of an attachment to the toe of any plane, that will have not only a magnet, but a pad to attach a piece of 80 grit sandpaper, and a fine bristle brush behind the paper to gather the grit. Shouldn't add much more than 6 or 8 inches to the front of every plane and wouldn't matter if BU or BD. Rob Lee: you out there? If you're at the next FTJ auction, we'll talk! RE: New wood river 5 1/2 jack plane - bandit571 - 01-12-2019 Hmmm...wonder what they would say about my #5-1/2 that gets a bit of use......Stanley, Type 17, No. 5-1/2....has a 2-3/8" wide iron. YMMV RE: New wood river 5 1/2 jack plane - AHill - 01-13-2019 (01-07-2019, 02:47 PM)Strokes77 Wrote: Your secret is safe with us. Yep. All 10,000 of us and our lurkers. RE: New wood river 5 1/2 jack plane - Carl Grover - 01-14-2019 (01-12-2019, 12:05 PM)Tony Z Wrote: I'm actually thinking of doing a cad drawing of an attachment to the toe of any plane, that will have not only a magnet, but a pad to attach a piece of 80 grit sandpaper, and a fine bristle brush behind the paper to gather the grit. Shouldn't add much more than 6 or 8 inches to the front of every plane and wouldn't matter if BU or BD. Rob Lee: you out there? If you're at the next FTJ auction, we'll talk! Rob will put that out in April. carl |