+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: That time again.. (/showthread.php?tid=7346006)
Pages:
1
2
RE: That time again.. - bandit571 - 02-03-2019
Decided that 1), I needed to find out about how this new computer does pictures, and 2) needed to resaw some scraps to build a box or three..
had to find a way to resize what pictures I took....might have it almost figured out...
[attachment=16241]
Set up the rip fence,,,had to run each board through, flip end for end, and run it back through...then use the bandsaw to cut a thin web between the two pieces
[attachment=16242]
Part of the shop clean up, was to clean up the Stanley 45...oil the moving parts, and stash back in the case..
[attachment=16243]
Screwdrivers? yep, have a few that will work with this plane..
[attachment=16244]
Little "Chef's hat" is a Goodell-Pratt, and is a perfect fit for the spur bolts....round handle is from Millers Falls. The little square one also works with the spur bolts.....Not a lot of room for the bigger screwdriver.
Will need to flatten the parts, and see about building box...or two...
Stay tuned..
RE: That time again.. - Big Dave - 02-05-2019
Cleaning the shop always yields little surprises. Whether it be finding something thought to be lost, or discovering a space that can be better utilized....
Looking forward to watching the poker table build, Steve!
Dave
RE: That time again.. - Stwood_ - 02-05-2019
Yours pictures are looking better. You change camera's also?
RE: That time again.. - bandit571 - 02-07-2019
Bandit just got back home....Gall Bladder surgery ( 4 hours!) with a robot....took a long time to get it all out....going to take a few weeks to even try the shop.
Same old camera....
RE: That time again.. - Stwood_ - 02-07-2019
(02-07-2019, 01:26 PM)bandit571 Wrote: Bandit just got back home....Gall Bladder surgery ( 4 hours!) with a robot....took a long time to get it all out....going to take a few weeks to even try the shop.
Same old camera....
Goodness. Hard to believe they release everyone so early anymore.
RE: That time again.. - bandit571 - 02-07-2019
ER Sunday night, surgery Tuesday afternoon....got home today, just after Lunch....been a LONG, lost week....
RE: That time again.. - stav - 02-07-2019
Hope you're feeling better soon.
RE: That time again.. - Bill Holt - 02-07-2019
Hang in there and get well. You are, by far, our most productive WoodNet poster so we are all pulling for you!
RE: That time again.. - Tony Z - 02-08-2019
Thoroughly enjoyable to see tools being used! Hope you're feeling better.
RE: That time again.. - Skip J. - 02-13-2019
(02-07-2019, 08:15 PM)Bill Holt Wrote: Hang in there and get well. You are, by far, our most productive WoodNet poster so we are all pulling for you!
Hey Bandit;
We all are pulling for you, we're ready for you to post again... and appreciate you letting us in on your plans for the next project in your "other" thread....
Hang in there is right!