WTB 4" and 6" wood lathe tool rests - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: WTB 4" and 6" wood lathe tool rests (/showthread.php?tid=7346782) |
WTB 4" and 6" wood lathe tool rests - longbarrel50 - 03-02-2019 I'm looking for two wood lathe tool rests for my Jet lathe. They need to be 1" shanks/posts. I'd like either a 4" or 6" straight rest that is offset so I can get closer to some small spindle turnings. I have the modular system with the round bars that thread into the post, but the banjo doesn't move in far enough with this style. I hope I've explained this well enough. Thanks. Chris RE: WTB 4" and 6" wood lathe tool rests - Dusty Workshop - 03-06-2019 Are you looking for something like this one? https://www.ebay.com/p/Lathepro-WP0219-6in-S-Curved-Wood-Lathe-Tool-Rest-With-5-8in-Post/17011372045 RE: WTB 4" and 6" wood lathe tool rests - toolmiser - 03-06-2019 I decided a couple years ago that I wanted a couple more for my Delta/Rockwell lathe. I scrounged around in the garage a little and welded up a couple with scrap metal. Maybe that would be an option for you even if you need to get it welded by someone else. RE: WTB 4" and 6" wood lathe tool rests - longbarrel50 - 03-12-2019 I'm not looking for the ones listed one bay. I have something similar to those. I may have to go the route of having something made. I was just hoping to find some used ones. Typically, I don't turn small diameter spindles, but I've had a few projects and where a different tool rest would have been better for me. Thanks for the replies and the help. Chris RE: WTB 4" and 6" wood lathe tool rests - matzner - 03-16-2019 (03-12-2019, 06:22 AM)longbarrel50 Wrote: I'm not looking for the ones listed one bay. I have something similar to those. Would something like this work? https://www.forums.woodnet.net/showthread.php?tid=7343794 David RE: WTB 4" and 6" wood lathe tool rests - bbrickey - 03-21-2019 You might try the tool rest dog leg. I would call to see if they can make it in your post size. http://www.turnrobust.com/product/tool-rest-dog-leg/ Alternately, the comfort rests do push the edge closer to the work and away from the banjo. http://www.turnrobust.com/product/mini-lathe-tool-rests-58-diameter-post/ RE: WTB 4" and 6" wood lathe tool rests - longbarrel50 - 03-22-2019 Thanks for the responses. I took the suggestion and made one out of 1/4" stainless plate on a 1" post. I had a local hop weld it. Cost was minimal. They did a great job. It does exactly what I want. The help on this forum is amazing. I really appreciate it. Chris |