+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: WTB- new blades for knuckles (/showthread.php?tid=7347995)
WTB- new blades for knuckles - jerk151 - 05-01-2019
Neither of my knuckles have skin on them.
Anyone have old stock they are willing to part with or a suggestion on the best place to source good hard steel?
Thank you
Jody
RE: WTB- new blades for knuckles - Stwood_ - 05-01-2019
Uumm. Send them to a plating shop?
RE: WTB- new blades for knuckles - tablesawtom - 05-01-2019
(05-01-2019, 05:43 PM)Stwood_ Wrote: Uumm. Send them to a plating shop?
I probably have blades to fit those planes. I will check tomorrow.
Tom
RE: WTB- new blades for knuckles - jerk151 - 05-02-2019
Thank you Tom.
Anyone familiar with the Hock plane irons they sell at Highland Woodworking? Tempered to Rc62, whatever that means or a Cryogenically treated A-2 option which I also don’t understand.
RE: WTB- new blades for knuckles - Phil S. - 05-02-2019
Hock irons are great - I have several. You can get them straight from the source here -
http://www.hocktools.com/products/bl.html
You can also give Ron a call to be sure that one of his irons will fit your plane and its adjustment system. Their FAQ will also answer your questions about the types of steel they use and why.
Great folks to deal with.
Phil
RE: WTB- new blades for knuckles - jerk151 - 05-03-2019
(05-02-2019, 08:45 PM)Phil S. Wrote: Hock irons are great - I have several. You can get them straight from the source here -
http://www.hocktools.com/products/bl.html
You can also give Ron a call to be sure that one of his irons will fit your plane and its adjustment system. Their FAQ will also answer your questions about the types of steel they use and why.
Great folks to deal with.
Phil
Thank you Phil, I will check those out. I also have a couple PM's on older blades, so I think between it all, I will find what I need.
Thank you All