+- Woodnet Forums (https://www.forums.woodnet.net)
+-- Thread: Longworth chuck (/showthread.php?tid=7352355)
Pages:
1
2
Longworth chuck - Bill Mains - 01-14-2020
Curlyworkshop on etsy selling pre cut plates for longworth chuck for reasonable price. You provide hardware. Anybody order from this guy?
RE: Longworth chuck - PVW - 01-15-2020
(01-14-2020, 05:02 PM)Bill Mains Wrote: Curlyworkshop on etsy selling pre cut plates for longworth chuck for reasonable price. You provide hardware. Anybody order from this guy?
can't find him on etsy but would be interested in one
RE: Longworth chuck - AHill - 01-15-2020
It's Curly Wood Shop - three separate words (and "wood" not "work")
https://www.etsy.com/shop/CurlyWoodShop
RE: Longworth chuck - PVW - 01-17-2020
(01-15-2020, 04:08 PM)AHill Wrote: It's Curly Wood Shop - three separate words (and "wood" not "work")
https://www.etsy.com/shop/CurlyWoodShop
thanks
RE: Longworth chuck - BloomingtonMike - 01-30-2020
I can also cut them. Let me know what you are looking for if you want another source/bid.
RE: Longworth chuck - BloomingtonMike - 02-11-2020
(01-30-2020, 05:23 PM)BloomingtonMike Wrote: I can also cut them. Let me know what you are looking for if you want another source/bid.
I make 3/4" red oak plywood (the cabinet stuff from Menards) Longworth chuck discs. I have 10, 12, 14, 16, and 20" discs. Its just the discs - you supply whatever stops you wish and the hardware to attach them. Many folks center drill corks or whatever. I will pocket out a recess in the back at whatever dia you want under 3.1" for your face plate - you provide the face plate obviously.
I charge $50 plus any fees and exact shipping (lower 48 only please) for any size - its a $35 cutting fee plus $15 for materials.
Let me know if you are interested.
RE: Longworth chuck - Lumber Yard® - 02-11-2020
Yeah, anybody with a CNC can cut a set for you fairly reasonable. I've actually cut a few sets for myself and friends. IIRC BloomingtonMike sold some on Ebay as well. He's a well respected guy around here... just order a set from him. $0.02
RE: Longworth chuck - Bill Holt - 02-11-2020
Mike, PM sent.
bh
RE: Longworth chuck - Arlin Eastman - 02-11-2020
(02-11-2020, 05:40 PM)Bill Holt Wrote: Mike, PM sent.
bh
Bill
What I did on both inside faces is apply wax to make them slide better and they do not affect the rest since it is already binded together with the knobs or bolts or wing nuts
RE: Longworth chuck - BloomingtonMike - 02-16-2020
Bill here are the discs I just cut