Shaker Sideboard: I'm In Fine Woodworking! - Printable Version +- Woodnet Forums (https://www.forums.woodnet.net) +-- Thread: Shaker Sideboard: I'm In Fine Woodworking! (/showthread.php?tid=7354883) |
RE: Shaker Sideboard: Drawer Construction - AlistairD - 07-23-2020 great build. well documented too. enjoy following along. thanks. RE: Shaker Sideboard: Drawer Construction - Philip1231 - 07-30-2020 Alistair & Martin: Thanks much! More Progress: [attachment=28680] RE: Shaker Sideboard: Drawer Construction - Hank Knight - 07-31-2020 Nice! Those look great! RE: Shaker Sideboard: Drawer Construction - Philip1231 - 08-26-2020 Finally got back into the shop (August was spent on outdoor pursuits). Drawers are glued up and mostly fitted. Soon, on to the doors. [attachment=29223] RE: Shaker Sideboard: Drawer Construction - Aram - 08-26-2020 (08-26-2020, 10:24 AM)Philip1231 Wrote: Finally got back into the shop (August was spent on outdoor pursuits). Drawers are glued up and mostly fitted. Soon, on to the doors. Those drawers look fantastic. RE: Shaker Sideboard: Drawer Construction - Martin S. - 08-26-2020 Outstanding! I've been waiting for an update. The dovetails are beautiful, and the drawer fit on all of them is superb. Well done!!! RE: Shaker Sideboard: Drawer Construction - Philip1231 - 08-27-2020 Thanks gents! Much appreciated. Stay tuned for more exciting developments! RE: Shaker Sideboard: Drawer Construction - Philip1231 - 08-29-2020 On to the doors. I found some nice quarter-sawn stock for the stiles/rails, and a nice piece of curly cherry for the door panels. They have been rough milled, and sitting patiently waiting for final milling and joinery. I did want to mention that I have come up with a new use for blue tape: I like to call it the "Blue Tape Drawer Pull Trick". Its much too complicated to explain here, but I will be posting a multi-page thesis on this new blue tape application at some point in the future [attachment=29275] [attachment=29276] RE: Shaker Sideboard: Door Construction - Philip1231 - 08-30-2020 Cut the rough stock for the top this morning: single piece 19" wide. Getting close......... [attachment=29292] RE: Shaker Sideboard: Door Construction - Philip1231 - 09-02-2020 Got a good start on the door joinery today: [attachment=29334] |